本文通过模型计算和实验对于含尘烟气冲刷圆管和螺旋肋片管的管束换热器的流动和传热特性进行研究。结果表明, 换热管束的形式对颗粒的传热强化作用具有明显的影响。颗粒对圆管的传热强化作用必须予以考虑, 而对于螺旋肋片管则可忽略。
The flow and heat transfer characteristic of no finned and spirial finned tube array isinvestigated in detail using model calculating and experimental method. It is indicated that theheat transfer enhancement of tube array by particles in flow is affected by tube type. Theenhancement of heat transfer effect due to particle impact must be considered for no finnedtube, but can be omitted for spirial finned tube in process of tube array heat exchangerdesigned.
参考文献
| [1] | Botterill J S M.Fluid-bed Heat Transfer[M].Academic Press; New York,1975 |
| [2] | Adams R L .Coupled gas convection and unsteady conduction effects influid bed heat transfer based on a single particle model[J].International Journal of Heat and Mass Transfer,1982,25(12):1819-1828. |
| [3] | 岑可法;樊建人.燃烧流体力学[M].北京:中国水利水电出版社,1991 |
| [4] | 沈珞婵;高翔;骆仲泱 等.气固两相流横掠圆管传热的研究[J].中国电机工程学报,1996,16(06):400-405. |
| [5] | 高翔 .新型余热回收、除尘、脱硫多功能烟气净化装置的基础研究[D].浙江大学,1995. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%