以煤油做捕收剂,采用泡沫浮选方法回收硅片切割废砂浆的碳化硅.研究了捕收剂浓度、pH值、固液比及粒度对分离效果的影响.结果表明,当捕收剂用量为50 mL ·g-1、pH值为8.3、固液比为3:400 9·mL-1、粒度为8.636μm时,分离效果最佳,此条件下回收的碳化硅纯度为99.08%.
参考文献
[1] | Bruton TM. .General trends about photovoltaics based on crystalline silicon[J].Solar Energy Materials and Solar Cells: An International Journal Devoted to Photovoltaic, Photothermal, and Photochemical Solar Energy Conversion,2002(1/4):3-10. |
[2] | 侯思懿,铁生年,汪长安.硅片切割废砂浆中去除硅和二氧化硅工艺的研究[J].人工晶体学报,2013(07):1435-1439. |
[3] | T.Y. Wang;Y.C. Lin;C.Y. Tai;R. Sivakumar;D.K. Rai;C.W. Lan .A novel approach for recycling of kerf loss silicon from cutting slurry waste for solar cell applications[J].Journal of Crystal Growth,2008(15):3403-3406. |
[4] | Nishijima S.;Izumi Y.;Takeda S.;Suemoto H.;Nakahira A.;Horie S. .Recycling of abrasives from wasted slurry by superconducting magnetic separation[J].IEEE Transactions on Applied Superconductivity: A Publication of the IEEE Superconductivity Committee,2003(2):1596-1599. |
[5] | 铁生年,李星.硅烷偶联剂对碳化硅粉体的表面改性[J].硅酸盐学报,2011(03):409-413. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%