针对船板钢CCSA板坯角部横裂纹发生率偏高的现象,在高温力学性能测试和铸坯表面温度测量的基础上,分析认为二冷系统造成的铸坯温度分布不合理是其主要成因.采取两项措施来优化二冷系统:改变部分喷嘴型号并调整喷嘴布置;利用修正的板坯连铸凝固传热数学模型对二冷配水进行优化.试验结果表明,二冷系统优化后,铸坯角部温度有了较大提升,角部横裂纹发生率由3.7%降至0.41%.
参考文献
| [1] | Mok W Y;Jung Y T;Jin S D .New criterion for internal crack formation in continuously cast steels[J].METALLURGICAL AND MATERIALS TRANSACTIONS B,2000,31(08):779-794. |
| [2] | 刘坤,冯亮花,赵连刚,仇圣桃.板坯连铸机二冷段的动态控制模型[J].钢铁研究学报,2005(02):75-78. |
| [3] | A. K. Tieu;I. S. Kim .Simulation of the continuous casting process by a mathematical model[J].International Journal of Mechanical Sciences,1997(2):185-192. |
| [4] | Kavicka F;Stetina J;Sekanina B et al.The optimization of a concealing technology by two numerical models[J].Journal of Materials Processing Technology,2007,185:152-159. |
| [5] | 蔡开科.连铸结晶器[M].北京:冶金工业出版社,2008 |
| [6] | 钱刚,Ruan Xiaojiang,阮小江,冷永磊.低碳钢连铸方坯角部横裂形成分析和控制工艺[J].特殊钢,2006(06):41-43. |
| [7] | EL-BEALY M;LESKINEN N;FREDISON H .Simulation of cooling conditions in secondary cooling zones in continuous casting proeess[J].Lronmaking and Steelmaking,1995,22(03):246-255. |
| [8] | 陈雷.连续铸钢[M].北京:冶金工业出版社,1994 |
| [9] | 贺道中.连续铸钢[M].北京:冶金工业出版社,2007 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%