采用聚碳硅烷作为黏结剂主体,添加陶瓷组元的方法制备了新型耐高温黏结剂.采用流变仪研究了黏结剂的流变性能,采用TGA、XRD及SEM等方法研究了黏结剂的性能以及各组分含量与黏结剂性能之间的关系.结果表明:高温黏结剂具有良好的高温热稳定性及粘结强度,1 200℃质量损失为16％,平均粘结强度为23.4 MPa.
参考文献
| [1] | Baziard Y;Abdi B E I;Amara D et al.Study ofcriticalfailure parametersforan adhesive-bonded single lap joint with ceramic adherends[J].Int J Adhes,1995,15:155-160. |
| [2] | Jigang Wang;Nan Jiang;Haiyun Jiang .Effect of the evolution of phenol-formaldehyde resin on the high-temperature bonding[J].International Journal of Adhesion & Adhesives,2009(7):718-723. |
| [3] | Zhang, J.;Luo, R.;Jiang, M.;Xiang, Q.;Li, J. .The preparation and performance of a novel room-temperature-cured heat-resistant adhesive for ceramic bonding[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(6):2952-2959. |
| [4] | Wang J G;Guo Q G;Liu L et al.The high-temperatures bonding of graphite/ceramics by organ resin matrix adhesive[J].Int J Adhes,2006,26:532-536. |
| [5] | Colombo P.;Pippel E.;Woltersdorf J.;Sglavo V. .Joining of reaction-bonded silicon carbide using a preceramic polymer[J].Journal of Materials Science,1998(9):2405-2412. |
| [6] | Lewinsohn C A;Colombo P;Reimanis I et al.Stresses occurring during joining of ceramics using preceramic polymers[J].Journal of the American Ceramic Society,2001,84:2240-2245. |
| [7] | SUO Jun,CHEN Zhao-hui,ZHENG Wen-wei,HAN Wei-min.Effects of pyrolysis temperature and fillers on joining of ceramics via silicone resin[J].中国有色金属学会会刊（英文版）,2005(06):1322-1327. |
| [8] | Xiaokun Yuan;Shu Chen;Xuehong Zhang .Joining SiC ceramics with silicon resin YR3184[J].CERAMICS INTERNATIONAL,2009(8):3241-3245. |
| [9] | Peter G;Seibold M .Modeling of dimensional changes during polymer 2 ceramic conversion for bulk component fabrication[J].Journal of Materials Science,1992,27:1053-1060. |
| [10] | Dietmar S;Nathan B;David P et al.Preceramic polymeras "reagents" in the preparation of ceramics[J].Journal of the American Ceramic Society,1991,74(10):2687-2689. |
| [11] | Peter G .Active 2 filler 2 controlled pyrolysis of preceramic polymers[J].Journal of the American Ceramic Society,1995,78(04):835-848. |
| [12] | Peter G .Near net shape forming of ceramic components by pyrolysis of polymer 2 filler mixtures[J].Cfi/Ber DKG,1994,71(06):304-309. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%