采用改进的经纱脉络法表征三维机织复合材料结构，并将单胞分解为亚胞晶阵，提出屈曲形态码概念，并利用编码中蕴含的信息以分段样条曲线拟合纱线中心线；采用经纬纱互相规仿的方法，以分段样条曲线拟合纱线截面轮廓线，进而以解析法建立了预制件的几何模型；将所建模型与电镜照片进行对比，获得了较好的一致性。研究结果表明：可用分段样条曲线描述预制件中纱线的形态；精度相同时，互规法建模效率远高于迭代法。
The improved warp skeleton method was used to describe 3D woven composites architecture, and unit cell was decomposed into subcells/grids. The concept of crimp pattern code was put forward, and the yarn centerline could be fitted based on the information contained in the codes. With＂ mutual imitation method＂ of tows, cross-section contour line was fitted by sectioned spline curves. Merging centerlines and contour lines could derive yarnsrcurved surfaces, which were used to create geometric model of a preform. The obtained cross-section shape makes quite good agreement with SEM photoes. The results show that the sectioned spline curves can he used to describe the yarn pattern, and the efficiency of mutual imitation method is significantly higher than that of iteration one under the same precision.
参考文献
| [1] | 杨连贺,李姜.三维机织复合材料纱线束截面变形研究[J].复合材料学报,2008,25(4):198-204. |
| [2] | 杨连贺,李姜,陈利.三维机织复合材料结构表征与实体造型[J].复合材料学报,2009,26(4):169-175. |
| [3] | 杨彩云,李嘉禄,田玲玲.复合材料中纱束的几何形态[J].复合材料学报,2007(4):123-127. |
| [4] | 杨连贺,邱冠雄,黄故.任意结构三维机织复合材料弹性性能的计算机模拟[J].复合材料学报,2000,17(2):79-83. |
| [5] | 邢誉峰,田金梅.三维正交机织复合材料单胞特征单元及其应用[J].航空学报,2007,28(4):881-885. |
| [6] | 周储伟.三维机织复合材料的一个细观力学模型[J].中国航空学报:英文版,2005,18(1):40-46. |
| [7] | WangX F, Wang X W, Zhou G M, et al. Multi-scale analyses of 3D woven composite based on periodicity boundary conditions [J]. Journal of Composite Materials, 2007, 41 (14) : 1773-1788. |
| [8] | 杨彩云,李嘉禄.基于纱线真实形态的三维机织复合材料细观结构及其厚度计算[J].复合材料学报,2005,22(6):178-182. |
| [9] | Whitney T J, Chou T W. Modeling of 3D angle-interlock textile structural composites [J].Journal of Composite Materials, 1989, 23(9): 890-911. |
| [10] | 梁仕飞,矫桂琼,王波.三维机织C/C-SiC复合材料弹性性能预测[J].复合材料学报,2011,28(1):138-142. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%