为了制备高强度且分布均匀的氮化硅陶瓷,采用包覆成孔剂法改进普通添加成孔剂的方法,常压烧结氮化硅多孔陶瓷,采用阿基米德法、三点弯曲法分别测试材料的孔隙率及抗弯强度,用扫描电镜和光学放大镜对氮化硅多孔陶瓷显微结构和表观结构进行研究.结果表明,添加包覆过的成孔剂强度比添加未包覆的成孔剂强度高,孔隙率为50%时,强度增加近一倍.强度的提高归因于特殊的微观结构,即气孔的均匀分布和孔与孔之间相间隔分布.
参考文献
| [1] | Lee C.J. .Effect of #alpha#Si_3N_4 Particle Size on the Microstructural Evolution of Si_3N_4 Ceramics[J].Journal of the American Ceramic Society,1999(1/3):753-756. |
| [2] | Yu Zhang;Yi-Bing Cheng;Srinivasarao Lathabai .Erosion Response of Highly Anisotropic Silicon Nitride[J].Journal of the American Ceramic Society,2005(1):114-120. |
| [3] | M. Backhaus-Ricoult;V. Guerin;A. -M. Huntz .High-Temperature Oxidation Behavior of High-Purity alpha-, beta-, and Mixed Silicon Nitride Ceramics[J].Journal of the American Ceramic Society,2002(2):385-392. |
| [4] | Andreas Zerr;Markus Kempf;Marcus Schwarz .Elastic Moduli and Hardness of Cubic Silicon Nitride[J].Journal of the American Ceramic Society,2002(1):86-90. |
| [5] | Jihong She;Jian-Feng Yang;Daniel Doni Jayaseelan .Thermal Shock Behavior of Isotropic and Anisotropic Porous Silicon Nitride[J].Journal of the American Ceramic Society,2003(4):738-740. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%