欢迎登录材料期刊网

材料期刊网

高级检索

研究了采用LD-RH-LF-CC工艺流程生产帘线钢时,钢中酸溶铝含量的变化情况。研究发现,精炼过程中酸溶铝含量略有下降,但连铸过程中酸溶铝含量急剧下降。夹杂物中Al2O3含量随着酸溶铝含量的上升而逐渐增大。SiO2含量降低时夹杂物熔点提高。采用低碱度、低Al2O3含量的顶渣精炼工艺,严格控制钢中w([Als])在0.000 5%~0.001%范围内,促进夹杂物上浮,有利于钢中氧化物夹杂的数量减少、尺寸细小和塑性化。

Effect of acid-soluble aluminum on the property of the inclusions during the production process of LD RH--LF--CC of tyre cord steel was investigated. It is found that Acid-soluble aluminum has a slight decrease trend during the refining process but drops rapidly during the continuous casting process. With the increase of Acid-solu- ble aluminum content, the Al2O3content in the inclusions increases while the SiO2 content decrease, meanwhile the melting of inclusions increases. Using top slag with low basicity and low Al2O3 content in the refining process, strictly controlling the Acid-soluble aluminum within a range of 0. 000 5 %-0. 001%, as well as promoting floating upward of inclusions, will be benefit for low number and little size and plastification of the inclusions in steel.

参考文献

[1] Takaaki Minamidea;Noriaki Hiraga;Takao Shibata .Develop- ments in Steel Cord Wire Rods[J].Kobe Steel Engineering Re- ports,2000,50(03):31.
[2] Yoshitaro Ujiie;Hideok;Hideoli Kmura .Production Technology for Steel Bars and Wire Rods[J].NIPPON STEEL TECHNICAL REPORT,1999(80):1-3.
[3] Masayasu Kimura .Kobe Steel's Recent Advancements in Steel Wire Rod and Bar Products[J].Kobe Steel Engineering Re- ports,2006,56(03):1.
[4] 张弛,万根节,施青,蔡力.宝钢钢帘线盘条的技术进步[J].宝钢技术,2010(01):58-63.
[5] Hiroyasu Itoh;Mitsutaka Hino;Shiro Ban-ya .Assessment of A1 Deoxidation Equilibrium in Liquid Iron[J].The Iron and Steel Institute of Japan,1997,83(12):773.
[6] Hideaki SUITO;Ryo INOUE .Thermodynamics on Control of Inclusions Composition in Ultraclean Steels[J].ISIJ International,1996(5):528-536.
[7] 王立峰,王新华,张炯明,王万军,卓小军.控制高碳钢中CaO-Al2O3-SiO2类夹杂物成分的实验研究[J].钢铁,2004(01):21-23.
[8] Gatellier C;Gaye H .Inclusions Control in Low-Aluminum Steel[J].Revue de Metallurgie/Cahiers d'Informations Techniques,1992,89(04):361.
[9] 陈家祥.炼钢常用图表数据手册[M].北京:冶金工业出版社,1998
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%