采用Gleeble-1500D型热模拟试验机对Cr9Mo高合金钢进行热压缩变形,研究了该钢在温度1 173～1 473 K和应变速率10-3～1 s-1条件下的热塑性变形行为;并基于经典的应力-位错关系和动态再结晶动力学理论,分别建立了Cr9Mo钢的加工硬化-动态回复和动态再结晶两阶段的流变应力本构方程.结果表明:所建立的两个阶段的流变应力本构方程与试验曲线吻合较好,可以用该方程来预测Cr9Mo钢的高温流变行为.
参考文献
| [1] | C.A.HERNADEZ;S.F.MEDINA;J.RUIZ .MODELLING AUSTENTE FLOW CURVES IN LOW ALLOY AND MICROALLOYED STEELS[J].Acta materialia,1996(1):155-163. |
| [2] | S.F.MEDINA;C.A.HERNANDEZ .GENERAL EXPRESSION OF THE ZENER-HOLLOMON PARAMETER AS A FUNCTION OF THE CHEMICAL COMPOSITION OF LOW ALLOY AND MICROALLOYED STEELS[J].Acta materialia,1996(1):137-148. |
| [3] | L. X. Kong;P. D. Hodgson;B. Wang .Development of constitutive models for metal forming with cyclic strain softening[J].Journal of Materials Processing Technology,1999(0):44-50. |
| [4] | El Wahabi M.;Cabrera JM.;Prado JM. .Hot working of two AISI 304 steels: a comparative study[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):116-125. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%