流延生坯的叠层是多层陶瓷器件制造过程的一个关键步骤,热压法是最基本的也是目前使用最为广泛的一种叠层技术.本文主要研究了热压参数对叠片层间结合效果和变形程度的影响,结果表明:层间结合效果会随着压力的增大、温度的提高或者保温保压时间的延长而得到提高;正交试验结果显示热压参数对叠片外部变形程度影响的主次关系为:温度＞压力＞时间.最后,本文分析了多层流延生坯最优热压工艺参数的确定方法.
参考文献
| [1] | Mistier R E;Twiname E R.Tape casting theory and practice[M].Westerville:The American Ceramic Society,2000 |
| [2] | Imanaka Y.Multilayered low temperature cofired ceramics (LTCC) technalogy[M].New York:Springer Science,2005 |
| [3] | 今中佳彦;詹欣祥;周济.多层低温共烧陶瓷技术[M].北京:科学出版社,2010 |
| [4] | Thomas C. K. Yang;Sea-Fue Wang;Chung-Chili Juan .Effect of lamination conditions on sintered properties of glass-ceramic substrates for microelectronic packaging[J].Journal of Materials Processing Technology,2004(2):165-170. |
| [5] | J. GURAUSKIS;A. J. SANCHEZ-HERENCIA;C. BAUDIN .Joining green ceramic tapes made from water-based slurries by applying low pressures at ambient temperature[J].Journal of the European Ceramic Society,2005(15):3403-3411. |
| [6] | M.A.Piwonski and A.Roosen .Low pressure lamination of ceramic green tapes by gluing at room temperature[J].Journal of the European Ceramic Society,1999(2):263-270. |
| [7] | Roesen A .Low-temperature/low-pressure lamination of green ceramic tapes[J].Advances in Engineering Materials,2002,2(06):374-376. |
| [8] | Dominik Jurkow;Henryk Roguszczak;Leszek Golonka .Cold chemical lamination of ceramic green tapes[J].Journal of the European Ceramic Society,2009(4):703-709. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%