为探究电爆炸导体断路开关与电感储能系统的参数匹配问题，通过分析金属导体在电爆炸过程中的物态变化，结合电爆炸导体断路开关参数选取的理论经验公式，得到电爆炸导体断路开关的参数，并进行多次电爆炸试验。结果表明：在电感储能系统的初始电压为5 kV、电爆炸导体的直径为0.15 mm时，可得到大于140 MW的脉冲功率信号。
In order to explorethe parameter match between the electro-explosive opening switch and inductive energy storage system,experiments of multiple groups of metallic conductor were conducted through the analysis of state changes in the process of electrical explosion of metal conductor,and combination with a theoretical model in selecting parameters of electro-explosive opening switch. The experimental results show that pulse power signals greater than 140 MW can be obtained when the initial voltage in the inductive energy storage system is 5 kV and the electric explosion conductor diameter is 0.15 mm.
参考文献
| [1] | 王莹;孙元章;阮江军.脉冲功率科学与技术[M].北京:北京航空航天大学出版社,2010:53-364. |
| [2] | 郝世荣,韩文辉,王敏华,张南川,谢卫平,戴英敏,刘伟.20GW低阻负载电感储能功率调节装置研究[J].强激光与粒子束,2004(02):223-226. |
| [3] | 杨宇,伍友成,耿力东,王敏华,郝世荣,韩文辉,张南川.电爆炸丝和脉冲变压器驱动低阻抗负载研究[J].高压电器,2010(02):39-41. |
| [4] | 魏世丞,XU Bin-shi,王海斗,JIN Guo.电热爆炸喷涂的发展及其关键技术分析[J].中国表面工程,2008(04):8-13. |
| [5] | 杨宇 .金属丝电爆炸特性及应用研究[D].中国工程物理研究院,2005. |
| [6] | 李永忠,张建德,张学书.电爆炸切断开关的实验研究[J].国防科技大学学报,1998(06):74-77. |
| [7] | 龚兴根.电爆炸断路开关[J].强激光与粒子束,2002(04):577-582. |
| [8] | 杨家志,刘钟阳,许东卫,刘天杰.电爆炸过程中金属丝阻抗的变化[J].爆炸与冲击,2009(02):205-208. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%