功能材料, 2004, 35(z1): 1344-1348.
非制冷红外探测器用BST薄膜的制备与性能研究
吴传贵 1, , 刘兴钊 2, , 张万里 3, , 李言荣 {"currentpage":1,"firstResult":0,"maxresult":10,"pagecode":5,"pageindex":{"endPagecode":5,"startPagecode":1},"records":[{"abstractinfo":"封接是平板式固体氧化物燃料电池(SOFC)研究的热点和难点,目前对封接材料气密性的测试尚没有统一标准.介绍了一种SOFC气密测试装置并使用该装置进行玻璃与云母复合压缩密封的气密性测试,其中金云母与12#玻璃复合压缩密封的电池在800℃,压力为2.8×105Pa,内部气压在5～10 kPa时,得到电池的漏率在0.005～0.0075(cm3·min-1)/cm.初步结论是在云母、玻璃、电解质和金属连接体形成的层状结构中,云母和玻璃的热膨胀系数越是接近电解质的热膨胀系数其封接效果越好.","authors":[{"authorName":"王欢","id":"5c6bfda0-2391-452f-8f19-8463f3829ea9","originalAuthorName":"王欢"},{"authorName":"韩敏芳","id":"bff79cf1-f228-4856-a8ab-78f9ee652316","originalAuthorName":"韩敏芳"},{"authorName":"王琦","id":"fae35ccd-4e07-429f-8467-a2fb216a182f","originalAuthorName":"王琦"}],"doi":"","fpage":"515","id":"e4b0e62c-c94e-4721-987d-f3fae3e2a975","issue":"z1","journal":{"abbrevTitle":"XYJSCLYGC","coverImgSrc":"journal/img/cover/XYJSCLYGC.jpg","id":"69","issnPpub":"1002-185X","publisherId":"XYJSCLYGC","title":"稀有金属材料与工程"},"keywords":[{"id":"92fe30b8-c8b0-4655-9e26-e29b6f19e8b3","keyword":"平板式SOFC","originalKeyword":"平板式SOFC"},{"id":"6e434983-9a09-499c-976f-9c6f9ecec075","keyword":"复合封接","originalKeyword":"复合封接"},{"id":"5fea0c46-6078-4d0c-b6cc-f980a04c080f","keyword":"气密性测试","originalKeyword":"气密性测试"},{"id":"7cff2c2e-932a-4dfa-964b-8217895651cb","keyword":"漏率","originalKeyword":"漏率"}],"language":"zh","publisherId":"xyjsclygc2008z1135","title":"平板式SOFC封接气密性测试研究","volume":"37","year":"2008"},{"abstractinfo":"活塞杆镀铬层的气密性问题,是航空工厂长期存在的一个老大难问题.为了解决一这问题,本文从消除或减少铬层裂纹(治本)和封闭或碾压裂纹(治标)两个方面进行了研究,证明采用脉冲镀铬+铬层金刚石碾平工艺,可保证铬层的气密性达到设计要求.","authors":[{"authorName":"刘佑厚","id":"5aae2d5c-5da3-401d-8059-cb7e6c8ad576","originalAuthorName":"刘佑厚"},{"authorName":"苏育龙","id":"a24f4c56-8b05-41e7-acea-bfc0e7bc667a","originalAuthorName":"苏育龙"},{"authorName":"王宇","id":"f3f9c932-5821-48c3-a553-669305a4b333","originalAuthorName":"王宇"}],"doi":"10.3969/j.issn.1001-1560.2002.01.008","fpage":"19","id":"39fb4f5b-7723-469f-b3c9-7f2dc5f56f20","issue":"1","journal":{"abbrevTitle":"CLBH","coverImgSrc":"journal/img/cover/CLBH.jpg","id":"7","issnPpub":"1001-1560","publisherId":"CLBH","title":"材料保护"},"keywords":[{"id":"7116e06f-06d5-4efc-924a-d4077a4612f1","keyword":"镀铬层","originalKeyword":"镀铬层"},{"id":"2fb7973b-248c-41df-b419-83030d1a5f0e","keyword":"气密性","originalKeyword":"气密性"},{"id":"2fe87ef9-4094-4299-8e8a-ca74234595fc","keyword":"脉冲镀铬","originalKeyword":"脉冲镀铬"},{"id":"3aa08c0e-45f3-4581-a1b2-230db72a90b3","keyword":"金刚石碾平","originalKeyword":"金刚石碾平"}],"language":"zh","publisherId":"clbh200201008","title":"镀铬层气密性研究","volume":"35","year":"2002"},{"abstractinfo":"玻璃封接金属管壳是集成电路封装中的1类主要组件,该管壳是将玻璃与可伐合金封接而成的绝缘子钎装在铜管座上制成的.本文研究了PM型混合电路铜功率外壳气密性失效问题,产品高温老化后,气密性可由10-8Pam3/s降到10-5Pam3/s.结合对失效产品的解剖,以及与国外不漏气的同类型功率管的对比分析,分析了影响玻璃封接金属管壳气密性的因素以及生产工艺对封接质量的影响,提出若干改进建议,并指出提高产品质量的有效途径.","authors":[{"authorName":"耿志挺","id":"2a8cdf1b-004f-480c-80da-c9acd28d3771","originalAuthorName":"耿志挺"},{"authorName":"马莒生","id":"8dd830ac-33cc-4318-b4de-b4e3b07d2711","originalAuthorName":"马莒生"},{"authorName":"宁洪龙","id":"a9593293-1aff-4d59-8346-507bd9546649","originalAuthorName":"宁洪龙"},{"authorName":"黄福祥","id":"afa13b2c-dab6-4d0f-90c4-44d8f814172e","originalAuthorName":"黄福祥"}],"doi":"","fpage":"650","id":"7e793c05-f7a2-4034-8fbb-3c8571c4a1eb","issue":"8","journal":{"abbrevTitle":"XYJSCLYGC","coverImgSrc":"journal/img/cover/XYJSCLYGC.jpg","id":"69","issnPpub":"1002-185X","publisherId":"XYJSCLYGC","title":"稀有金属材料与工程"},"keywords":[{"id":"e6cd850c-453c-4682-8f55-1c46cee683ae","keyword":"玻璃封接","originalKeyword":"玻璃封接"},{"id":"9c988353-8223-4159-a5d4-cae8ddb25f35","keyword":"绝缘子","originalKeyword":"绝缘子"},{"id":"87b8dcd4-98ec-4a3a-b6c4-30c3b701f19a","keyword":"气密性","originalKeyword":"气密性"},{"id":"4ea208b6-f764-4cba-8302-7b2bd78f8b4d","keyword":"可伐合金","originalKeyword":"可伐合金"}],"language":"zh","publisherId":"xyjsclygc200308018","title":"混合集成电路铜功率外壳气密性失效分析","volume":"32","year":"2003"},{"abstractinfo":"某型飞机起落架零件外筒在镀硬铬后常出现渗气现象,正在服役的部分起落架零件出现因铬层腐蚀而导致镀层脱落现象,严重制约了起落架与机体同寿命目标的实现.通过对影响硬铬镀层气密性和耐蚀性的主要因素前处理质量、电镀参数及镀层后处理等的分析研究,摸索出了提高硬铬镀层气密性和耐蚀性的方法,经过了长期的实践检验,对指导实际生产具有现实意义.","authors":[{"authorName":"李博","id":"60a51f07-3917-44f4-b403-3d6fd987a1e6","originalAuthorName":"李博"}],"doi":"10.3969/j.issn.1001-3849.2014.01.007","fpage":"26","id":"e838d35a-d2d7-435b-bdcc-d312aad65efb","issue":"1","journal":{"abbrevTitle":"DDYJS","coverImgSrc":"journal/img/cover/DDYJS.jpg","id":"20","issnPpub":"1001-3849","publisherId":"DDYJS","title":"电镀与精饰 "},"keywords":[{"id":"587dce2e-752b-4b2e-851d-ca8b71f619ff","keyword":"起落架","originalKeyword":"起落架"},{"id":"9b34f2b5-1836-466f-b57d-818e085d5809","keyword":"硬铬镀层","originalKeyword":"硬铬镀层"},{"id":"8639bdf7-9c54-4c03-8837-9e76fd07e4ed","keyword":"微裂纹","originalKeyword":"微裂纹"},{"id":"de39b359-9251-4a85-8fe6-846635d324c5","keyword":"气密性","originalKeyword":"气密性"},{"id":"c6ce57cd-6384-4c6f-99e4-fd29d2cf0bc2","keyword":"耐蚀性","originalKeyword":"耐蚀性"}],"language":"zh","publisherId":"ddjs201401007","title":"提高硬铬镀层气密性和耐蚀性的方法","volume":"36","year":"2014"},{"abstractinfo":"研究了采用Sn/Bi合金作为中间层的键合封装技术.通过电镀的方法在基片上形成Cr/Ni/Cu/Sn、芯片上形成Cr/Ni/Cu/Bi多金属层,在513K、150Pa的真空环境中进行共晶键合,键合过程不需使用助焊剂,避免了助焊剂对微器件的污染.实验表明:这种键合工艺具有较好的气密性,键合区合金层分布均匀,无缝隙、气泡等缺陷,键合强度较高,能够满足电子元器件和微机电系统(MEMS)可动部件低温气密性封装的要求.","authors":[{"authorName":"张东梅","id":"2b690046-886e-44e4-8199-fbe9f52880fe","originalAuthorName":"张东梅"},{"authorName":"丁桂甫","id":"43cbc921-379a-4530-a40b-bff1dadd1249","originalAuthorName":"丁桂甫"},{"authorName":"汪红","id":"99a8d2b9-b652-4dcf-a899-67351200c533","originalAuthorName":"汪红"},{"authorName":"姜政","id":"2349d99a-7ac0-4cfa-8b79-9a0acc18bcb2","originalAuthorName":"姜政"},{"authorName":"姚锦元","id":"1531f306-3768-4585-9fbf-f5cca95364bd","originalAuthorName":"姚锦元"}],"doi":"10.3969/j.issn.1007-4252.2006.03.010","fpage":"211","id":"570ccfd8-615c-4c9b-9a3e-d91a4305a7c6","issue":"3","journal":{"abbrevTitle":"GNCLYQJXB","coverImgSrc":"journal/img/cover/GNCLYQJXB.jpg","id":"34","issnPpub":"1007-4252","publisherId":"GNCLYQJXB","title":"功能材料与器件学报 "},"keywords":[{"id":"7a60260b-3ea7-4cb7-9095-c25884209e42","keyword":"微机电系统","originalKeyword":"微机电系统"},{"id":"7939d7f3-6b05-431a-8b93-24754e0cda7a","keyword":"气密性封装","originalKeyword":"气密性封装"},{"id":"cc50059f-1c91-46e9-b706-6f04a1f2e6f3","keyword":"低温键合","originalKeyword":"低温键合"}],"language":"zh","publisherId":"gnclyqjxb200603010","title":"基于Sn/Bi合金的低温气密性封装工艺研究","volume":"12","year":"2006"},{"abstractinfo":"将稻草经清洗、蒸汽爆破、粉碎等工艺处理后,在100℃条件下用离子液溶解稻草粉末,得到秸秆溶液,采用延流法制得了秸秆膜,并选用棉织物作增强基材,将制得的秸秆溶液与棉织物复合,冷却洗净,去除离子液后晾干,得到高气密性增强膜.分析了秸秆膜的化学成分,结果表明,其保留了原稻草秸秆的主要化学成分,且含量相差不大.还对增强膜与秸秆膜进行了表面形态、回潮率、透湿性能、透气性能、力学性能研究对比,研究结果表明,秸秆液在棉织物表面形成无界面致密膜,这种增强膜具有高气密性、强吸湿性、较好的力学性能.","authors":[{"authorName":"郭密","id":"024f0e22-10e6-42b2-be94-fd73de6e37e0","originalAuthorName":"郭密"},{"authorName":"周晓洁","id":"b84808cc-2701-4f19-adf6-82cb289e3c6a","originalAuthorName":"周晓洁"},{"authorName":"王晓广","id":"eddd991a-e529-4319-ac5f-9b5e8bda08b8","originalAuthorName":"王晓广"}],"doi":"","fpage":"59","id":"3dbeed18-76d4-456f-8789-77d25085294b","issue":"4","journal":{"abbrevTitle":"MKXYJS","coverImgSrc":"journal/img/cover/MKXYJS.jpg","id":"54","issnPpub":"1007-8924","publisherId":"MKXYJS","title":"膜科学与技术 "},"keywords":[{"id":"62471515-e611-46fb-b453-1bcb2f7564b1","keyword":"秸秆","originalKeyword":"秸秆"},{"id":"5a5422f7-9843-4b74-a84c-01a954ce560d","keyword":"复合材料","originalKeyword":"复合材料"},{"id":"e8f00bdd-699c-40fa-bab8-3d43f755b836","keyword":"离子液","originalKeyword":"离子液"},{"id":"94e41511-a62e-4ac7-811f-686aa2303d8a","keyword":"增强膜","originalKeyword":"增强膜"},{"id":"2607b837-ff44-4a58-b1bb-229d18c65dbb","keyword":"气密性","originalKeyword":"气密性"},{"id":"b65c793e-e07d-4a8b-a555-001c0dec0387","keyword":"吸湿性","originalKeyword":"吸湿性"}],"language":"zh","publisherId":"mkxyjs201304011","title":"用稻草秸秆制备高气密性增强膜及其性能研究","volume":"33","year":"2013"},{"abstractinfo":"通过原位乳化聚合制备了不同膨胀石墨含量(1％、2％、3％和4％质量分数)的聚丙烯腈-聚甲基丙烯酸甲酯共聚物/膨胀石墨纳米复合材料.通过紫外-可见和傅里叶变换红外光谱验证了共聚物及纳米复合材料结构的形成.用X射线衍射、扫描电镜、透射电镜研究了膨胀石墨在聚合物基体中的分散性及其形貌.用热重考察了复合材料的耐热稳定性,同时也考察了复合材料的电导特性及其阻抗随膨胀石墨含量的变化规律.研究表明,随着复合材料中石墨含量的增加,复合材料的氧气密性和热稳定性获得较大程度的改善.","authors":[{"authorName":"","id":"fdf9ddff-8360-4847-ae61-7490cdd6f266","originalAuthorName":""},{"authorName":"","id":"1b0fa79b-be99-4e16-be65-a5c6e02950b2","originalAuthorName":""}],"doi":"10.1016/S1872-5805(12)60017-1","fpage":"271","id":"ba411707-db70-4a44-b6ec-0b97a168d299","issue":"4","journal":{"abbrevTitle":"XXTCL","coverImgSrc":"journal/img/cover/XXTCL.jpg","id":"70","issnPpub":"1007-8827","publisherId":"XXTCL","title":"新型炭材料"},"keywords":[{"id":"ba6d58f8-800a-42e9-9d3b-69c3350c460b","keyword":"纳米复合材料","originalKeyword":"纳米复合材料"},{"id":"103d0759-e2d7-437e-96fa-2ec6260b5c6b","keyword":"聚丙烯腈-聚甲基丙烯酸甲酯共聚物","originalKeyword":"聚丙烯腈-聚甲基丙烯酸甲酯共聚物"},{"id":"09e79154-4e54-48d5-a943-6507904d3e01","keyword":"膨胀石墨","originalKeyword":"膨胀石墨"},{"id":"8b7c5832-b0e1-44e2-b8f5-4f26bdf5e026","keyword":"气密性","originalKeyword":"气密性"},{"id":"bc32f47c-7e17-4431-97f0-5de7ae65dacf","keyword":"热重分析","originalKeyword":"热重分析"}],"language":"zh","publisherId":"xxtcl201204005","title":"纳米石墨片/共聚物复合材料及其耐热、导电和气密性","volume":"27","year":"2012"},{"abstractinfo":"","authors":[],"doi":"","fpage":"323","id":"5a774701-e462-4e7c-8db4-cd6c19a88b88","issue":"2","journal":{"abbrevTitle":"ZGYSJSXB","coverImgSrc":"journal/img/cover/ZGYSJSXB.jpg","id":"88","issnPpub":"1004-0609","publisherId":"ZGYSJSXB","title":"中国有色金属学报"},"keywords":[{"id":"a6b21a40-06e1-4e1a-90ab-b03bc44158bb","keyword":"","originalKeyword":""}],"language":"zh","publisherId":"zgysjsxb199902021","title":"W-Cu电子封装材料的气密性","volume":"9","year":"1999"},{"abstractinfo":"行波管放大链中关键气密材料的气密性与行波管放大链的性能有密切的联系,分别用IRS、XRD、XPS、SEM和EDS等对该气密材料镍铜合金进行了一系列的失效分析,对影响其气密性的因素做了相应的探讨.结果表明:锰的氧化物在晶界处析出会明显弱化镍铜合金的晶界内聚力,进而致使晶间发生断裂,气密性变差.","authors":[{"authorName":"周勋","id":"b2ebe4b6-b651-4d86-b926-dcc8af044f05","originalAuthorName":"周勋"},{"authorName":"左长明","id":"5fc20ba4-f874-45b2-85a9-30e82575f5ac","originalAuthorName":"左长明"},{"authorName":"荣丽梅","id":"84922d53-248d-4fbd-9414-2872f05735fc","originalAuthorName":"荣丽梅"}],"doi":"","fpage":"157","id":"633155d3-710b-463a-914c-6b7b8ff0d66a","issue":"9","journal":{"abbrevTitle":"CLDB","coverImgSrc":"journal/img/cover/CLDB.jpg","id":"8","issnPpub":"1005-023X","publisherId":"CLDB","title":"材料导报"},"keywords":[{"id":"6ef210c7-46fc-444e-abcd-b374742fe9a9","keyword":"行波管","originalKeyword":"行波管"},{"id":"6cf520fe-5303-4fa2-a4ac-03516fd874d6","keyword":"气密性","originalKeyword":"气密性"},{"id":"c21af2e3-1927-4b5f-9d36-a82e3c34e88d","keyword":"镍铜合金","originalKeyword":"镍铜合金"},{"id":"e35f8623-f462-461f-aa11-5bd74c35ac03","keyword":"偏析","originalKeyword":"偏析"},{"id":"b5caf9d6-14bb-44c1-a086-a0d20a5532c5","keyword":"晶间断裂","originalKeyword":"晶间断裂"}],"language":"zh","publisherId":"cldb200709042","title":"行波管放大链中关键气密材料的失效分析","volume":"21","year":"2007"},{"abstractinfo":"系统地研究了玻璃浆料在低温下气密封装MEMS器件的过程.采用该工艺(预烧结温度400℃,烧结温度500℃,外加压强3kPa)形成的封装结构具有较高的封接强度(剪切力>15kg)及良好的气密性(气密检测合格率达到85%),测得的漏率符合相关标准.","authors":[{"authorName":"许薇","id":"23dd894f-36bb-4121-98b7-c5b8172c7a44","originalAuthorName":"许薇"},{"authorName":"王玉传","id":"3f7275a2-ab7e-4e38-960e-add2c456198c","originalAuthorName":"王玉传"},{"authorName":"罗乐","id":"396113e2-7373-479a-8d02-83b37dc818ff","originalAuthorName":"罗乐"}],"doi":"10.3969/j.issn.1007-4252.2005.03.017","fpage":"343","id":"b53d1408-dc58-4424-8a3c-7bbdc88b183b","issue":"3","journal":{"abbrevTitle":"GNCLYQJXB","coverImgSrc":"journal/img/cover/GNCLYQJXB.jpg","id":"34","issnPpub":"1007-4252","publisherId":"GNCLYQJXB","title":"功能材料与器件学报 "},"keywords":[{"id":"ef00ae5e-eb23-4411-87fa-8f88635a9af2","keyword":"玻璃浆料","originalKeyword":"玻璃浆料"},{"id":"eb142b70-c95d-4cf7-acf9-0e7ecbb8a59f","keyword":"圆片级键合","originalKeyword":"圆片级键合"},{"id":"78a80f40-f1b2-4336-81e5-26b01a3044cf","keyword":"低温气密封装","originalKeyword":"低温气密封装"}],"language":"zh","publisherId":"gnclyqjxb200503017","title":"玻璃浆料低温气密封装MEMS器件研究","volume":"11","year":"2005"}],"totalpage":6577,"totalrecord":65769}