欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料导报
  4. 连续纤维增韧陶瓷基复合材料的内耗机制与损伤表征

材料导报, 2010, 24(23): 1-7.

连续纤维增韧陶瓷基复合材料的内耗机制与损伤表征

洪智亮 1, , 成来飞 2, , 鲁琳静 3, , 张立同 4, , 张青 5,

1.西北工业大学超高温结构复合材料国防科技重点实验室,西安,710072

2.西北工业大学超高温结构复合材料国防科技重点实验室,西安,710072

3.西北工业大学超高温结构复合材料国防科技重点实验室,西安,710072

4.西北工业大学超高温结构复合材料国防科技重点实验室,西安,710072

5.西北工业大学超高温结构复合材料国防科技重点实验室,西安,710072

基金项目:   111材料创新引智基地项目(5100-W099103)  

关键词： 内耗 , 连续纤维增韧陶瓷基复合材料 , 损伤表征 , 环境行为 , 腐蚀损伤

Internal Friction Mechanisms and Damage Evaluation of Continuous Fiber Reinforced Ceramic Matrix Composites

总结了连续纤维增韧陶瓷基复合材料(CFCC)的内耗机制,回顾了有关内耗与损伤行为之间关系的研究成果,并以此为据提出了以内耗表征CFCC环境腐蚀行为的方法.结合笔者关于CFCC腐蚀行为对其内耗行为影响的探索性研究,证实该方法可行,尤其是对纤维和纤维/基体之间界面的氧化行为表现出高度的敏感性.

参考文献

[1] R. Naslain .Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview[J].Composites science and technology,2004(2):155-170.
[2] Roger R. Naslain .SiC-Matrix Composites: Nonbrittle Ceramics for Thermo-Structural Application[J].International journal of applied ceramic technology,2005(2):75-84.
[3] Ohnabe Hisaichi;Masaki Shoju .Potential application of ceramic matrix composites to aero-engine components[J].Composites, Part A. Applied science and manufacturing,1999(4):489-496.
[4] 张立同,成来飞,徐永东.新型碳化硅陶瓷基复合材料的研究进展[J].航空制造技术,2003(01):24-32.
[5] Chermant J L;Boitier G;Darzens S et al.The creep mechanism of ceramic matrix composites at low temperature and stress,by a material science approach[J].Journal of the European Ceramic Society,2002,22(14-15):2443.
[6] Reynaud P;Dalmaz A;Tallaron C et al.Apparent stiffening of ceramic-matrix composites induced by cyclic fatigue[J].Journal of the European Ceramic Society,1998,18(13):1827.
[7] H. Mei;L. Cheng;L. Zhang .Behavior of two-dimensional C/SiC composites subjected to thermal cycling in controlled environments[J].Carbon: An International Journal Sponsored by the American Carbon Society,2006(1):121-127.
[8] Gregory N. Morscher;Julian Martinez-Fernandez .Fiber effects on minicomposite mechanical properties for several silicon carbide fiber-chemically vapor-infiltrated silicon carbide matrix systems[J].Journal of the American Ceramic Society,1999(1):145-155.
[9] Halbig M C .The oxidation kinetics of continuous carbon fibers in a cracked ceramic matrix composite,NASA/TM-2001-210520[R].Washington:NASA,2001.
[10] Halbig M C;Eckel A J;Cawley J D .Oxygen diffusion and reaction kinetics in continuous fiber ceramic matrix composites,NASA/TM-1999-208911[R].Washington:NASA,1999.
[11] Halbig M C;Eckel A J .Oxidation of continuous carbon fibers within a silicon carbide matrix under stressed and unstressed conditions,NASA/TM-2000-210224[R].Washington:NASA,2000.
[12] Naslain R;Guette A;Rebillat F;Le Gallet S;Lamouroux F;Filipuzzi L;Louchet C .Oxidation mechanisms and kinetics of SiC-matrix composites and their constituents[J].Journal of Materials Science,2004(24):7303-7316.
[13] Cheng Laifei .Oxidation behavior of three dimensional C/SiC composites in air and combustion gas environments[J].Carbon: An International Journal Sponsored by the American Carbon Society,2000(15):2103-2108.
[14] Halbig M C;Cawley J D .Modeling the oxidation kinetics of continuous carbon fibers in a ceramic matrix,NASA/TM-2000-209651[R].Washington:NASA,2000.
[15] Larry P. Zawada;James Staehler;Steve Steel .Consequence of Intermittent Exposure to Moisture and Salt Fog on the High-Temperature Fatigue Durability of Several Ceramic-Matrix Composites[J].Journal of the American Ceramic Society,2003(8):1282-1291.
[16] Nickel K G .Corrosion of non-oxide ceramics[J].Ceramics International,1997,23(02):127.
[17] Wang Y G;Wu Y H;Cheng L F et al.Hot corrosion behavior of barium aluminosilicate-coated C/SiC composites at 900℃[J].Journal of the American Ceramic Society,2010,93(01):204.
[18] Gregory N. Morscher .Modal acoustic emission of damage accumulation in a woven SiC/SiC composite[J].Composites science and technology,1999(5):687-697.
[19] Liu C D;Cbeng L F;Luan X G et al.Damage evolution and real-time non-destructive evaluation of 2D carbon-fiber/SiC-matrix composites under fatigue loading[J].Materials Letters,2008,62:3922.
[20] Ramachandra C;Lee K N;Tewari S N et al.Spectroscopic nondestructive evaluation of environmental harrier coating failure on silicon-hased ceramics[J].Journal of the American Ceramic Society,2004,87(06):1117.
[21] Wang X;Mei J F;Xiao P .Non-destructive evaluation of thermal barrier coatings using impendence spectroscopy[J].Journal of the European Ceramic Society,2001,21(07):855.
[22] A.I. Ustinov;V.S. Skorodzievski;E.V. Fesiun .Damping capacity of nanotwinned copper[J].Acta materialia,2008(15):3770-3776.
[23] Mizuhayashi H;Ishikawa Y;Tanimoto H et al.Feasibility study of hydrogenated amorphous alloys as high-damping materials[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,370(1-2):546.
[24] Chen Q F;Zuo X B;Wang L M et al.NiTi wire as a superelastic damping material in structural engineering[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2006,438-440:1089.
[25] Liao L H;Wang H W;Li X F et al.Research on the dislocation damping of Mg2Si/Mg-gAl composite materials[J].Materials Letters,2007,61(11-12):2518.
[26] Aaltio I;Mohanchandra K P;Heczko O et al.Temperature dependence of mechanical damping in Ni-Mn-Ga austenite and non-modulated martenaite[J].Scripta Materialia,2008,59(05):550.
[27] Kaneko H;Inoue K;Tominaga Y et al.Damping performance of polymer blend/organic filler hybrid materials with selective compatibility[J].Materials Letters,2002,52(1-2):96.
[28] Sheng Tian;Fangjin Cui;Xiaodong Wang .New type of piezo-damping epoxy-matrix composites with multi-walled carbon nanotubes and lead zirconate titanate[J].Materials Letters,2008(23):3859-3861.
[29] Jean-Marie Berthelot;Mustapha Assarar;Youssef Sefrani;Abderrahim El Mahi .Damping analysis of composite materials and structures[J].Composite structures,2008(3):189-204.
[30] Sastry S;Krishna M;Uchil J et al.A study on damping behavior of aluminite particulate reinforced ZA-27 alloy metal matrix composites[J].Journal of Alloys and Compounds,2001,314(1-2):268.
[31] Yoshida I;Yokosuka M;Monma D et al.Damping properties of metal-piezoelectric composites[J].Journal of Alloys and Compounds,2003,355(1-2):136.
[32] Gu J H;Zhang X N;Gu M Y .Effect of fiber coating on the longitudinal damping capacity of fiber-reinforced metal matrix composites[J].Materials Letters,2005,59(2-3):180.
[33] Adams R D;Maheri M R et al.Damping in advanced polymer-matrix composites[J].Journal of Alloys and Compounds,2003,355(1-2):126.
[34] H. KISHI;M. KUWATA;S. MATSUDA .Damping properties of thermoplastic-elastomer interleaved carbon fiber-reinforced epoxy composites[J].Composites science and technology,2004(16):2517-2523.
[35] 侯向辉,李贺军,沈健,王灿,朱震刚.碳/碳复合材料内耗行为研究[J].材料工程,2000(07):6-9.
[36] 侯向辉,李贺军,王灿,朱震刚,沈健.热解碳基碳/碳复合材料的内耗特征与机制[J].复合材料学报,2001(01):89-92.
[37] 张钧,徐永东,张立同,成来飞.连续纤维增韧碳化硅基复合材料内耗特征及机制[J].无机材料学报,2005(04):889-894.
[38] Hou X H;Li H J;Wang C et al.Internal friction behavior of carbon-carbon composites[J].Carbon,2000,38(15):2095.
[39] Hou X H;Li H J;Shen J et al.Effects of microstructure on the internal friction of carbon-carbon composites[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2000,286(02):250.
[40] J. C. Goldsby .Temperature-dependent elastic and anelastic behavior of silicon-based fiber-reinforced silicon carbide ceramic matrix composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):266-274.
[41] Chandra R;Singh S P;Gupta K .Damping studies in fiberreinforced composites:A review[J].Computers & Structures,1999,46(01):41.
[42] Birman V.;Byrd LW. .Damping in ceramic matrix composites with matrix cracks[J].International Journal of Solids and Structures,2003(16):4239-4256.
[43] 冯端;王业宁;丘第荣.金属物理(下)[M].北京:科学出版社,1975:554.
[44] 过梅丽.高聚物与复合材料的动态力学热分析[M].北京:化学工业出版社,2002:18.
[45] Pereze R J;Zhang J;Gungor M N et al.Damping behavior of 6061AI/Gr metal matrix composites[J].Metall Trams A,1993,24A(03):701.
[46] G. Boitier;S. Darzens;J.-L. Chermant .Microstructural investigation of interfaces in CMCs[J].Composites, Part A. Applied science and manufacturing,2002(10):1467-1470.
[47] Naslain R .The design of the fiber-matrix interfacial zone in ceramic matrix composites[J].Composites Part A:Applied Science and Manufacturing,1998,29(9-10):1145.
[48] Qiao S R;Zhou S R;Bai S H et al.The internal friction of unidirectional C/C composites fabricated in a magnetic field[J].Carbon,1997,35(31):389.
[49] Honda H;Kimura H;Sanada Y et al.Changes of pleochroism and extinction contours in carbonaceous mesophase[J].Carbon,1971,9:695.
[50] Singer L S;Lewis R T.The mesophase and high modulus carbon fibers from pitch[A].Gatlinburg,Tennessee,1973:207.
[51] Zhang Q;Cheng LF;Wang W;Zhang LT;Xu YD .Effect of SiC coating and heat treatment on damping behavior of C/SiC composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):254-258.
[52] Kogo Y;Iijima Y;Igata N .Internal friction of carbon-carbon composites at elevated temperatures[J].Journal of Alloys and Compounds,2003,355(1-2):148.
[53] Sato S;Serizawa H;Araki H et al.Temperature dependence of internal friction and elastic modulus of SiC/SiC composites[J].Journal of Alloys and Compounds,2003,355(1-2):142.
[54] Kogo Y;Iijima Y;Igata N .Enhancement of internal friction of carbon-carbon composites by selective oxidation[J].Journal of Alloys and Compounds,2003,355(1-2):154.
[55] Nelson D J;Hancock J W .Interracial slip and damping in fibre reinforced composites[J].Journal of Materials Science,1978,13(11):2429.
[56] Liu CS.;Han FS.;Banhart J.;Zhu ZG. .Low-frequency internal friction of foamed Al[J].Philosophical Magazine.A.Physics of condensed matter, defects and mechanical properties,1998(6):1329-1337.
[57] Boccaccini AR.;Chawla KK.;Ponton CB. .Development and healing of matrix microcracks in fibre reinforced glass matrix composites: assessment by internal friction[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):141-150.
[58] Kaya C;Kaya F;Mori H .Damage assessment of alumina fiber-reinforced mullite ceramic matrix composites subjected to cyclic fatigue at ambient and elevated temperatures[J].Journal of the European Ceramic Society,2002,22(04):447.
[59] Kuo W S;Chou T W.Modeling of the thermomechanical behaviour of glass matrix composites[A].Warrendale,PA:The Minerals,Metals and Materials Society,1990:311.
[60] Hong Z L;Cheng L F;Zhang L T.Internal friction behavior of C/SiC composites with environmental barrier coatings in corrosive environment[J].Int J Appl Ceram Techn,2010
[61] Hong Z L;Cheng L F;Zhang L T et al.Water vapor corrosion behavior of scandium silicates at 1400℃[J].Journal of the American Ceramic Society,2009,92(01):193.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net