欢迎登录材料期刊网

材料期刊网

高级检索

为研究热氢处理技术对Ti2AlNb基合金板材高温拉伸变形行为的影响,在实验温度为870、900、930和990℃,应变速率为2.5×10-2s-1条件下,对H含量为0%和0.2%(质量分数)的Ti-22Al-25Nb合金板材进行了高温拉伸实验,并对其微观组织进行了分析.结果表明:0.2%H可以降低合金板材的高温流动应力,提高延伸率.在930℃变形时,置氢合金的峰值应力比未置氢合金下降了约36%,延伸率比未置氢合金提高了约53%.氢致合金软化和增塑的主要机制是H促进了α2相的动态再结晶,促进了β/β2相的位错运动和动态回复,提高了β/β2相的含量.

参考文献

[1] D.Banerjee,A.K.Gogia,T.K.Nandi,V.A.Joshi,A new ordered orthorhombic phase in a Ti3Al-Nb alloy,Acta Metallurgica,36(4),871(1988)
[2] R.G.Rowe,Ti2AlNb based alloys outperform conventional titanium aluminides,Advanced Materials and Processes,3,33(1992)
[3] S.R.Dey,S.Satyam,J.J.Fundenberger,R.K.Ray,Evolution of crystallographic texture and microstructure in the orthorhombic phase of a two-phase alloyTi-22Al-25Nb,Intermetallics,17(8),622(2009)
[4] C.Leyens,H.Gedanitz,Long-term oxidation of orthorhombic alloy Ti-22Al-25Nb in air between 650 and 800℃,Scripta Materialia,41(8),901(1999)
[5] Y.Mao,S.Q.Li,J.W.Zhang,J.H.Peng,D.X.Zou,Z.Y.Zhong,Microstructure and tensile properties of orthorhombic Ti-Al-Nb-Ta alloys,Intermetallics,8(5-6),659(2000)
[6] A.K.Gogia,T.K.Nandy,D.Banerjee,Microstructure and mechanical properties of orthorhombic alloys in the Ti-Al-Nb system,Intermetallics,6(7-8),741 (1998)
[7] F.Chu,T.E.Mitchell,B.Majumdar,D.Miracle,T.K.Nandy,D.Banerjee,Elastic properties of the O phase in Ti-Al-Nb alloys,Intermetallics,5(2),147(1997)
[8] SI Yufeng,MENG Lihua,CHEN Yuyong,Research development of Ti2AlNb-based alloy,Aerospace Materials and Technology,3,10(2006)(司玉峰,孟丽华,陈玉勇,Ti2AlNb基合金的研究进展,宇航材料工艺,3,10(2006)
[9] ZHANG Yonggang,HAN Yafang,CHEN Guoliang,GUO Jianting,WAN Xiaojing,FENG Di,Structural Intermetallics (Beijing,National Defense Industry Press,2001) p.789 (张永刚,韩雅芳,陈国良,郭建亭,万晓景,冯涤,金属间化合物结构材料(北京,国防工业出版社,2001)p.789)
[10] C.Xue,W.D.Zeng,W.Wang,X.B.Liang,J.W.Zhang,Quantitative analysis on microstructure evolution and tensile property for the isothermally forged Ti2A1Nb based alloy during heat treatment,Materials Science & Engineering A,573,183(2013)
[11] P.Lin,Z.B.He,S.J.Yuan,J.Shen,Y.J.Huang,X.B.Liang,Instability of the O-phase in Ti-22Al-25Nb alloy during elevated-tem-perature deformation,Journal of Alloys and Compounds,587,96(2013)
[12] ZHANG Jianwei,ZHANG Haishen,ZHANG Xuecheng,LIANG Xiaobo,CHENG Yunjun,LI Shiqiong,Control of duplex-micro-structure and its effect on mechanical properties of Ti-23Al-17Nballoys,Rare Metal Materials and Engineering,39(2),372(2010)(张建伟,张海深,张学成,梁晓波,程云君,李世琼,Ti-23Al-17Nb合金双态组织的控制及其对力学性能的影响,稀有金属材料与工程,39(2),372(2010)
[13] Y.J.Cheng,S.Q.Li,X.B.Liang,Y.J.Cheng,S.Q.Li,Effect of deformed microstructure on mechanical properties of Ti-22Al-25Nb alloy,Transactions of Nonferrous Metals Society of China,16,s2058(2006)
[14] LIAO Bo,WANG Tiansheng,YANG Ke,YUAN Hui,Effect of thermochemical processing with hydrogen on microstructure of super-α2 alloy,Acta Metallurgica Sinica,31(5),A223(1995)(廖波,王天生,杨柯,苑辉,加氢热化学处理对Super-α2合金组织的影响,金属学报,31(5),A223(1995)
[15] Y.Zhang,S.Q.Zhang,Hydrogen effects on high temperature deformation characteristics of a cast Ti-14Al-19Nb-3V-2Mo alloy,Scripta Materialia,37(9),1315(1997)
[16] DING Hua,DU Yunhui,LU Guimin,DONG Lin,ZHANG Caibei,CUI Jianzhong,Effect of hydrogen on microstructure and super-plasticity of the Ti3Al based alloys,The Chinese Journal of Nonferrous Metals,8(Suppl.)(2),341 (1998)(丁桦,杜云惠,路贵民,董林,张彩碚,崔建忠,氢对Ti3Al基合金组织和超塑性能的影响,中国有色金属学报,8(增刊)(2),341(1998)
[17] DONG Lin,ZHANG Caibei,DING Hua,SUN Wei,ZHAO Zhijiang,Effect of hydrogenation on microstructure of the forging Ti-25Al-10Nb-3V-1Mo alloy,Chinese Journal of Materials Research,14(Suppl.),63(2000)(董林,张彩碚,丁桦,孙伟,赵志江,渗氢对Ti-25Al-1 0Nb-3V-1Mo锻态合金显微组织的影响,材料研究学报,14(增刊),63(2000)
[18] Z.Chen,F.Simca,M.T.Cope,Microstructure and tensile properties of aged Superalpha 2 intermetallic compound,Materials Science and Technology,8(8),729(1992)
[19] T.Sakai,Dynamic recrystallization microstructures under hot-working conditions,Journal of Materials Processing Technology,53(1-2),349(1995)
[20] I.Weiss,S.L.Semiatin,Thermomechanical processing of beta titanium alloys-an overview,Materials Science & Engineering A,243,46(1998)
[21] ZONGYingying,Study on the hydrogen enhanced plasticity mechanism and deformation behaviors of titanium alloys at high temperatures,PhD Dissertation,Harbin Institute of Technology(2007)(宗影影,钛合金置氢增塑机理及其高温变形规律研究,博士学位论文,哈尔滨工业大学(2007)
[22] ZHANG Yong,ZHANG Shaoqing,TAO Churhu,Effect of hydrogenation on the high temperature deformation behavior of a cast Ti-25Al-10Nb-3V-1Mo alloy,Acta Metallurgica Sinica,2(3),235(1996)(张勇,张少卿,陶春虎,氢化Ti-25Al-10Nb-3V-1Mo铸态合金的热压缩行为及其显微组织,金属学报,2(3),235(1996)
[23] P.Lin,Z.B.He,S.J.Yuan,J.Shen,Tensile deformation behavior of Ti-22Al-25Nb alloy at elevated temperatures,Materials Science & Engineering A,556,617(2012)
[24] DING Hua,LU Guimin,ZHANG Caibei,CUI Jianzhong,Effect of hydrogenation on microstructure and mechanical properties of inter-metallic Ti3Al,Materials Science and Technology,6(4),55(1998)(丁桦,路贵民,张彩碚,崔建忠,氢处理对Ti3Al金属间化合物组织和性能的影响,材料科学与工艺,6(4),55(1998)
[25] B.Liao,K.Yang,Y.Y.Li,T.S.Wang,H.Yuan,Effect of hydrogen on(α2/β)/β transustemperature of super-α2 alloy,Scripta Metallurgica & Materialia,32(2),277(1995)
[26] N.V.Kazantseva,S.V.Lepikhin,Study of the Ti-Al-Nb phase diagram,The Physicsof Metals and Metallography,102,169(2006)
[27] SUN Fusheng,MA Jimin,CAO Chunxiao,Microscopic observation of superplastic deformation in a Ti3Al alloy,Acta Metallurgica Sinica,30,B465(1994)(孙福生,马济民,曹春晓,Ti3Al基合金超塑性形变的微观观察,金属学报,30,B465(1994)
[28] GUO Heping,ZENG Yuansong,LI Zhiqiang,Research progress of superplasticity of intermetallic Ti2AlNb orthorhombic alloys,Aeronautical Manufacturing Technology,(10),64(2009)(郭和平,曾元松,李志强,O相合金Ti2AlNb的超塑性研究进展,航空制造技术,(10),64(2009)
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%