Creep behavior of Fe-15Cr-25Ni alloys with different grain boundary features has been in- vestigated at 850 and 950℃ and in stress range of 14.7～78.5 MPa.The single phase alloy exhibits typical recovery creep characteristics,and for the alloy in which M_(23)C_6 carbides densely precipitate at grain boundaries,the creep rate dramatically decreases and creep behav- ior is also significantly different from the single phase alloy.When the carbides precipitate at grain boundaries,the dislocation density are higher and the size of subgrains near grain boundaries are smaller than those of single phase alloy.The creep mechanisms for two grain boundary features have been discussed.
参考文献
| [1] | |
| [2] | |
| [3] | |
| [4] | |
| [5] |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%