以Fe2O3、Mn3O4和ZnO为原料,采用高能球磨法成功制备了Mn-Zn铁氧体,并利用XRD、SEM以及VSM等测试技术对样品进行了表征.研究了预烧温度对铁氧体相的形成过程以及烧结铁氧体材料的显微结构和磁性能的影响.结果表明,随着预烧温度的升高,预烧粉体的颗粒尺寸逐渐增大,起始磁导率和饱和磁化强度均呈现先增大后减小的趋势.适宜的预烧温度为850℃,高于或低于此温度,烧结铁氧体材料的显微结构和磁性能都会恶化.
参考文献
| [1] | Zheng Z G et al.Synthesis,structure and magnetic properties of nanocrystalline ZnrMn1-xFe2O4 prepared by ball milling[J].Journal of Alloys and Compounds,2008,466(1-2):377. |
| [2] | Azadmanjiri J .Preparation of Mn-Zn ferrite nanoparticles from chemical sol-gel combustion method and the magnetic properties after sintering[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,2007(44/46):4170-4173. |
| [3] | Gul IH;Abbasi AZ;Amin F;Anis-Ur-Rehman M;Maqsood A .Structural, magnetic and electrical properties of Co1-xZnxFe2O4 synthesized by co-precipitation method[J].Journal of Magnetism and Magnetic Materials,2007(2):494-499. |
| [4] | Pozo Lopez G;Silvetti S P;Urreta S E et al.Magnetic interactions in high-energy halbmilled NiZnFe2O4/SiO2 composites[J].Physica B,2007,398:241. |
| [5] | 罗驹华,王加芳.机械力化学法制备MnZn铁氧体粉体的研究[J].硅酸盐通报,2008(01):95-98. |
| [6] | 李标荣.电子陶瓷工艺原理[M].武汉:华中工学院出版社,1986:155. |
| [7] | 沈新兴,金辉.高磁导率低损耗MnZn铁氧体材料TH13的开发[J].磁性材料及器件,2006(03):43-45,49. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%