采用喷雾干燥-热还原的方法制备纳米级93W-4.9Ni-2.1Fe复合粉末和微量稀土掺杂的复合粉末,研究微量稀土掺杂对烧结致密化和晶粒尺寸的影响.结果表明:微量稀土掺杂能有效地降低该复合粉末的晶粒尺寸,并能改善粉末的分散度;纳米级复合粉末在1380～1410℃液相烧结可实现材料的近全致密化,比同种成分的传统钨合金的烧结温度降低了120℃左右,合金的相对密度可达99%以上;但微量稀土掺杂对烧结的致密化有一定的抑制作用;同时微量稀土元素对合金的晶粒尺寸的抑制作用主要发生在液相烧结阶段.
参考文献
| [1] | 范景莲.钨合金及其制备新技术[M].北京:冶金工业出版社,2006 |
| [2] | 范景莲,祁美贵,刘涛,成会朝.细晶钨合金动态力学性能与组织结构[J].稀有金属材料与工程,2007(04):633-635. |
| [3] | MAGNESS L.An overview of the penetration performances of tungsten and depleted uranium alloy penetraters:Ballistic performances and metallographic examinations[A].,2002:23-27. |
| [4] | BOSE A;COUQUE H;LANKFORD J.Critical developments in tungsten heavy alloys[A].Princeton,MPIF,1992:291-292. |
| [5] | Wei Q;Ramesh KT;Ma E;Kesckes LJ;Dowding RJ;Kazykhanov VU;Valiev RZ .Plastic flow localization in bulk-tungsten with ultrafine microstructure[J].Applied physics letters,2005(10):1907-1-1907-3-0. |
| [6] | BOSE A;GERMAN R M .Microstructural refinement of W-Ni-Fo heavy alloys by alloying additions[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1988,19:3100-3103. |
| [7] | PARK S H;KIM D K;LEE S;RYU H J HONG S H .Dynamic deformation behavior of an oxide-dispersed tungsten heavy alloy fabricated by mechanical alloying[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2001,328:2011-2013. |
| [8] | Ho J. Ryu;Soon H. Hong .Fabrication and properties of mechanically alloyed oxide-dispersed tungsten heavy alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):179-184. |
| [9] | 范景莲,汪登龙,刘涛.细晶钨合金制备工艺的研究[J].兵器材料科学与工程,2006(02):1-5. |
| [10] | Jinglian Fan;Tao Liu;Yunzhu Ma;Huichao Cheng .Preparation and Sintering of Nano-Sized W-Ni -Fe Powder by Sol-Spray-Drying Process[J].Materials Science Forum,2007(26):1409-1412. |
| [11] | 马运柱,黄伯云,范景莲,熊翔,汪登龙.稀土元素钇对纳米级W-Ni-Fe复合粉末制备的影响[J].稀有金属材料与工程,2005(07):1135-1138. |
| [12] | 彭石高,范景莲,刘涛,祁美贵,丁飞,田家敏.稀土Y对超细W-Ni-Fe复合粉末制备效果的影响[J].粉末冶金材料科学与工程,2008(02):106-110. |
| [13] | GERMAN R M.Sintering theory and practice[M].New York:wiley,1996:294-296. |
| [14] | Soon HH.;Ryu HJ. .Combination of mechanical alloying and two-stage sintering of a 93W-5.6Ni-1.4Fe tungsten heavy alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):253-260. |
| [15] | BOSE A;GERMAN R M .Development of a new W-Ni-Fe heavy alloy[J].Metallurgical & Materials Transactions A:Physical Metallurgy & Materials Science,1988,19:2467-2469. |
上一张
下一张
上一张
下一张
计量
- 下载量(0)
- 访问量(308)
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%