为定性研究表面粗糙度对喷丸残余应力场的影响,采用余弦曲线模拟靶材粗糙表面,建立喷丸二维有限元模型,采用ABAQUS/EXPLICIT求解器对喷丸过程进行数值模拟,研究了表面粗糙度喷丸残余应力场的影响规律,分析了同一粗糙度下弹丸尺寸和喷射速度对喷丸残余应力场的影响规律,并与表面理想光滑时的情况进行了对比.结果表明,表面粗糙度的增加使残余压应力区变浅变薄,甚至使靶材表面产生残余拉应力,不利于喷丸强化件抗疲劳性能的提高,喷丸件表面应尽可能光滑以改善喷丸效果.
参考文献
| [1] | 高玉魁.超高强度钢喷丸表面残余应力在疲劳过程中的松弛规律[J].材料热处理学报,2007(z1):102-105. |
| [2] | 凌祥,彭薇薇,倪红芳.喷丸三维残余应力场的有限元模拟[J].机械工程学报,2006(08):182-189. |
| [3] | T. Hong;J. Y. Ooi;B. Shaw .A numerical simulation to relate the shot peening parameters to the induced residual stresses[J].Engineering failure analysis,2008(8):1097-1110. |
| [4] | 高玉魁.高强度钢喷丸强化残余压应力场特征[J].金属热处理,2003(04):42-44. |
| [5] | Y.M. Xing;J. Lu .An experimental study of residual stress induced by ultrasonic shot peening[J].Journal of Materials Processing Technology,2004(1):56-61. |
| [6] | M. Kobayashi;T. Matsui;Y. Murakami .Mechanism of creation of compressive residual stress by shot peening[J].International Journal of Fatigue,1998(4):351-357. |
| [7] | S.-p. Wang;Y.-j. Li;Mei Yao;R.-z. Wang .Compressive residual stress introduced by shot peening[J].Journal of Materials Processing Technology,1998(1/3):64-73. |
| [8] | Y.F. Al-Obaid .Shot peening mechanics: experimental and theoretical analysis[J].Mechanics of materials,1995(2/3):251-260. |
| [9] | M. Guagliano .Relating Almen intensity to residual stresses induced by shot peening: a numerical approach[J].Journal of Materials Processing Technology,2001(3):277-286. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%