对经穿透挖补修理后的平面编织混杂铺层层板的拉伸性能进行了试验研究,结果表明初始损伤相同时,挖补斜度为1∶30的试件的拉伸强度最高,可以达到完好板强度的97.8％,并且不同挖补斜度的试件表现出不同的破坏模式.此外挖补斜度相同时增大初始损伤会导致拉伸强度降低.在试验基础上建立渐进损伤有限元模型,并对修理试件的拉伸强度及破坏过程进行研究,数值模型得到的极限强度和破坏模式与试验结果吻合良好.
参考文献
| [1] | 杜善义,关志东.我国大型客机先进复合材料应对策略思考[J].复合材料学报,2008,25(1):1-10.Du Shanyi, Guan Zhidong. Strategic considerations for development of advanced composite technology for large commercial aircraft in China[J]. Acta Materiae Compositae Sinica,2008,25(1):1-10. |
| [2] | Armstrong K B,Bevan L G,Cole Ⅱ W F.Care and repair of advanced composites[M]. 2nd edition. Warrendale, PA USA:SAE International,2005:263-265. |
| [3] | Jones J S,Graves S R.Repair techniques for Celion-LARC-160 graphite - polyimide composite structures [R].Washington:NASA,1984. |
| [4] | 孟凡颢,陈绍杰,童小燕.层压板修理设计中的参数选择问题[J].复合材料学报,2001,18(4):28-31.Meng Fanhao,Chen Shaojie,Tong Xiaoyan.Selection of the design parameters in laminate repair[J]. Acta Materiae Compositae Sinica,2001,18(4):28-31. |
| [5] | Kumar S B,Sridhar I,Sivashanker S I,et al.Tensile failure of adhesively bonded CFRP composites scarf joints[J].Materials Science and Engineering B,2006,132(1/2):113-120. |
| [6] | Kumar S B,Sivashanker S I,Osiyemi S O,et al.Failure of aerospace composite scarf joints subjected to uniaxial compression[J].Materials Science and Engineering A,2005,412(1/2):117-122. |
| [7] | Pipes R B,Adkins D W,Deaton J. Strength and repair of bonded scarf joints for repair of composite materials[R].Washington:NASA,1982. |
| [8] | Odi R A,Friend C M. An improved 2D model for bonded composite joints[J]. International Journal of Adhesion & Adhesives,2004,24(5):389-405. |
| [9] | CampilhoRDSG,Moura M F S F,Domingues J J M S.Stress and failure analyses of scarf repaired CFRP laminates using a cohesive damage mode[J]. Journal of Adhesion Science and Technology,2007,21(9):855-870. |
| [10] | Wang C H,Gunnion A J.On the design methodology of scarf repair to composite laminates[J]. Composite Science and Technology,2008,68(1):35-46. |
| [11] | Boeing Ltd.Boeing 737-800 structural repair manual[S].USA:Boeing Ltd.2003. |
| [12] | Airbus Ltd.Airbus A320 structural repair manual[S].France:Airbus Ltd.2007. |
| [13] | 邹健,程小全,邵世刚,等.基于ANSYS环境的平面编织层合板拉伸破坏数值仿真[J].复合材料学报,2007,24(6):180-184.Zou Jian,Cheng Xiaoquan,Shao Shigang,et al. Numerical simulation for plain woven composite laminate based on ANSYS software[J]. Acta Materiae Compositae Sinica,2007,24(6):180-184. |
| [14] | 程小全,邹健,许延敏,等.含孔平面编织混杂铺层层合板压缩破坏仿真[J].力学学报,2007,39(6):829-834.Cheng Xiaoquan,Zou Jian,Xu Yanmin,et al.Simulation of compressive failure of hybrid plain woven fabric laminate with a hole[J].Chinese Journal of Theoretical Applied Mechanics,2007,39(6):829-834. |
| [15] | Hashin Z.Failure criteria for unidirectional fiber composites[J].Journal of Applied Mechanics,1980,47(2):329-334. |
| [16] | 许延敏.平面编织复合材料层压板拉压性能研究[D].北京:北京航空航天大学,2007.Xu Yanmin. Investigation on tensile and compressive properties of plain woven laminates[D]. Beijing:Beihang University,2007. |
| [17] | 郑海燕.编织复合材料的低速冲击及冲击后压缩特性研究:试验及数值计算[D].西安:西北工业大学,2002.Zheng Haiyan.Study on low velocity impact and compressive characteristic after impact of woven composites:Testing and numerical estimate[D].Xi' an:Northwestern Polytechnical University,2002. |
| [18] | Camanho P P,Davila C G. Mixed mode decohesion finite elements for the simulation of delamination in composite materials[R].Washington:NASA,2002. |
| [19] | Turon A,Davila C G,Camanho P P,et al.An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models [J]. Engineering Fracture Mechanics,2007,74(10):1665-1682. |
| [20] | Wang C H,Gunnion A J.Design methodology for scarf repair to composite structures[R].Melbourne:Defense Science and Technology Organization,2006. |
| [21] | Gunnion A J,Herszberg I.Parametric study of scarf joints in composite structures[J].Composite Structures,2006,75 (1-4):364-376. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%