本文以去离子水作为冷却工质,研究了在低Re下流体横向冲刷微针肋阵列时的阻力特性,所用微针肋阵列肋高200μm,直径120μm,为转置正方形叉排结构.实验结果与可利用关联式的对比表明,现存宏观尺度上的关联式不能很好地预测流体横掠微针肋阵列热沉的阻力特性,特别是在Re大于140时,实验结果要高于关联式预测值.
参考文献
| [1] | 杨洪海.电子设备的散热问题与新型冷却技术的应用[J].新技术新工艺,2006(05):71-72. |
| [2] | Y Peles;A Kosar;C Mishra et al.Forced Convective Heat Transfer Across a Pin Fin Micro Heat Exchanger[J].Int.J.Heat Mass Transfer,2005,48:3615-3627. |
| [3] | A Kosar;C Mishra;Y Peles .Laminar Flow Across a Bank of Low Aspect Ratio Micro Pin Fin[J].Journal of Fluids Engineering,2005,127:419-430. |
| [4] | A Y Gunter;W A Shaw .A General Correlation of Friction Factors for Various Types of Surfaces in Cross Flow[J].Mech.Eng.(Am.Soc.Mech.Eng),1945,67:643-660. |
| [5] | T H Chilton;R P Generaux .Pressure Drop Across Tube Banks[J].Am.Inst.Chem.Eng,1933,29:161-170. |
| [6] | O P Bergelin;A P Colburn;H L Hull .Heat Transfer and Pressure Drop during Viscous Flow across Unabffled Tube Banks[Engineering Experimental Station,Bulletin No.2][R].University of Delaware,1950. |
| [7] | E M Sparrow;V B Grannis .Pressure Drop Characteristics of Heat Exchangers Consisting of Arrays of DiamondShaped Pin Fins[J].Int.J.Heat Mass Transfer,1991,34(03):589-600. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%