研究了以非磁性(Ni0.81Fe0.19)0.66CR0.34薄膜作为过诞层的坡莫合金Ni0.81Fe0.19薄膜的磁电阻效应和饱和磁场,分析退火处理对样品饱和磁场的影响和经刻蚀后的磁电阻效应膜线的尺寸效应,并建立一个统计模型定性分析了其性能变化的机理,计算结果符合实验.
The anisotropic magnetoresistance (AMR) and saturation magnetic field of the Permalloy thin films (Ni0.81Fe0.19) sputtered on a nonmagnetic (Ni0.81Fe0.19)0.66Cr0.34 buffer layer were measured. The AMR variations of the films after annealing and the size effect of the AMR stripes after etching were emphatically studied, and a qualitative analysis was proposed through a statistic model. The simulation results agree with the experiments.
参考文献
[1] | Michael J. Caruso, Carl H. Smith, Tamara Bratland and Robert Schneider. www.ssec.honeywell.com [2] 任志远, 李佐宜, 郑远开, 等. 传感技术学报, 1996, 9 (4): 70--72. [3] 郑远开, 于军, 谢基凡, 等. 华中理工大学学报, 1998, 26 (10): 65--67. [4] Rijka Th.G.S.M, Sour R.L.H, et al. IEEE Trans. Magn., 1995, 31 (6): 3865--3867. [5] Araki S, Sano M, Ohta M, et al. IEEE Trans. Magn., 1998, 34 (4): 1426--1428. [6] Lu Zheng-qi, Lai Wu-yan, Chai Chun-lin. Solid Thin Film, 2000, 375: 224--227. [7] Lee W Y, Toney M F, Mauri D. IEEE Trans. Magn., 2000, 36 (1): 381--385. [8] Hashim I, Atwater H A. Mater. Res. Soc. Symp. Proc., 1991, 232: 159--164. [9] 过璧君. 薄膜磁阻传感器, 第一版. 福州:福建科学技术出版社, 1993. 47. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%