通过实验和模拟方法考察了高气速,高固体通量循环流化床提升管内B类颗粒的流动情况.根据EMMS(energyminimization multi-scale)理论提出了改进的曳力修正表达式,同时与传统的曳力模型如Gidaspow,O'Brien-Syamlal,Koch-Hill-Ladd的计算结果进行了比较.结果表明:使用本文提出的修正曳力模型的计算模拟结果与实验值得到了较好的吻合.
参考文献
| [1] | 金燕,郑洽余.出口几何结构对循环流化床锅炉性能影响的试验研究[J].工程热物理学报,1999(01):129-132. |
| [2] | Jun-Sik Kim;Ryo Tachino;Atsushi Tsutsumi .Effects of solids feeder and riser exit configuration on establishing high density circulating fluidized beds[J].Powder Technology: An International Journal on the Science and Technology of Wet and Dry Particulate Systems,2008(1):37-45. |
| [3] | J.LI;W.GE;J.ZHANG;M.KWAUK .MULTI-SCALE COMPROMISE AND MULTI-LEVEL CORRELATION IN COMPLEX SYSTEMS[J].Chemical Engineering Research & Design: Transactions of the Institution of Chemical Engineers,2005(A6):574-582. |
| [4] | Li J;Ouyang J;Gao S.Multi-Scale Simulation of Particle-Fluid Complex Systems[M].北京:科学出版社,2005 |
| [5] | O'Brien T J;Syamlal M.Particle Cluster Effects in the Numerical Simulation of a Cirxulating Fluidized Bed[A].Somerset USA,1993:430-435. |
| [6] | Benyahia S;Syamlal M;O'Brien TJ .Extension of Hill-Koch-Ladd drag correlation over all ranges of Reynolds number and solids volume fraction[J].Powder Technology: An International Journal on the Science and Technology of Wet and Dry Particulate Systems,2006(2):166-174. |
| [7] | Gidaspow D.Multiphase Flow and Fluidization:Continum and Kinetic Theory Description[M].Boston:academic Press,1994 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%