欢迎登录材料期刊网

材料期刊网

高级检索

研究了Mg-9.8Gd-1.6Y-0.02Zn-0.5Zr(GW102)镁合金挤压棒材的显微组织和不同方向的拉伸性能.结果表明,经520℃均匀化处理的GW102镁合金的组织主要由过饱和镁固溶体、少量凝固期间析出的颗粒相Mg5(Y06Gd04)和非平衡相Mg3(Gd05,Y05)组成.挤压变形并在200℃时效热处理60h后,从过饱和固溶体中弥散析出大量针片状β"相和β"相.该镁合金经过挤压变形后具有明显的各向异性,垂直挤压方向合金的抗拉强度显著低于挤压方向的抗拉强度和延伸率.GW102合金的强化,其主要原因是长周期结构相(LPSO)与位错的相互作用和晶界上无沉淀析出带的影响.

参考文献

[1] DING Wenjiang,Science and Technology of Magnesium Alloys (Beijing,Science Press,2007)p.1(丁文江,镁合金科学与技术(北京,科学出版社,2007)p.1)
[2] CHEN Zhenhua,Wrought Magnesium Alloys (Beijing,Chemical Industry Press,2005)p.5(陈振华,变形镁合金(北京,化学工业出版社,2005)p.5)
[3] CHEN Zhenhua,YAN Hongge,CHEN Jihua,JIN Yajie,WANG huimin,CHEN Ding,Magnesium Alloys (Beijing,Chemical Industry Press,2004)p.5(陈振华,严红革,陈吉华,金亚杰,王慧敏,陈鼎,镁合金(北京,化学工业出版社,2004)p.5)
[4] Z.Yang,J.P.Li,Y.C.Guo,T.Liu,F Xia,Z.W.Zeng,M.X.Liang,Precipitation process and effect on mechanical properties of Mg-9Gd-3Y-0.6Zn-0.5Zr alloy,Materials Science and Engineering A,454/455,274-280(2007)
[5] WANG Qilong,WU Guohua,HOU Zhengquan,CHEN Bin,ZHENG Yun,DING Wenjiang,Elevated aging behavior of Mg-Gd-Y-Zr alloy,Special Casting & Nonferrous Alloys,29(11),1053(2009)(王其龙,吴国华,侯正全,陈斌,郑韫,丁文江,Mg-Gd-Y-Zr合金的高温时效行为研究,特种铸造及有色合金,29(11),1053(2009))
[6] S.M.He,X.Q.Zeng,L M Peng,X.Gao,J.F.Nie,W.J.Ding,precipitation in a Mg-10Gd-3Y-0.4Zr(wt.%) alloy during isothermal ageing at 250 ℃,Journal of Alloys and Compounds,421,309(2006)
[7] HE Yunbin,PAN Qinglin,QIN Yinjiang,LIU Xiaoyan,LI Wenbin,Effect of heat treatment on microstructure and mechanical properties of wrought ZK60 magnesium alloy,Heat Treatment of Metals,36(1),53(2011)(何运斌,潘清林,覃银江,刘晓艳,李文斌,热处理工艺对变形ZK60镁合金组织与性能的影响,金属热处理,36(1),53 (2011))
[8] HE Shangming,Study on the microstructural evolution,properties and fracture behavior of Mg-Gd-Y-Zr(-Ca) alloys,PhD thesis,Shanghai Jiao Tong University(2007)(何上明,Mg-Gd-Y-Zr(-Ca)合金的微观组织演变、性能和断裂行为研究,博士论文,上海交通大学(2007))
[9] YU Kun,LI Wenxian,LI Songrui,TAN Dunqiang,The research and development of Mg-rare earth alloy,Special Casting & Nonferrous Alloys,1(5),314(2001)(余琨,黎文献,李松瑞,谭敦强,含稀土镁合金的研究与开发,特种铸造及有色合金,l(5),314(2001))
[10] C.Xu,S.W.Xu,M.Y.Zheng,K.Wu,E.D.Wang,S.kamado,G.J.Wang,X.Y.Lv,Microstructures and mechanical properties of high-strength Mg-Gd-Y-Zn-Zr alloy sheets processed by sever hot rolling,Journal of Alloys and Compounds,524,46(2012)
[11] Tao Peng,Qudong Wang,Jinbao Lin,ManPing Liu,Hans J.Roven.Microstructure and enhanced mechanical properties of an Mg[J]110Gd-2Y-0.5Zr alloy processed by cyclic extrusion and compression,Materials Science and Engineering A,528,1143(2011)
[12] J.D.Robson,A.M.Twier,G.W.Lorimer,P.Rogers,Effect of extrusion conditions on microstructure,texture,and yield asymmetry in Mg-6Y-7Gd-0.5 wt%Zr alloy,Materials Science and Engineering A,528,7247(2011)
[13] Z.Yang,Y.C.Guo,J.P.Li,F.He,F.Xia,M.X.Liang,Plastic deformation and dynamic recrystallization behaviors of Mg-5Gd-4Y-0.5Zn-0.5Zr alloy,Materials Science and Engineering A,485,487(2008)
[14] Guo Yongchun,Li Jianping,Li Jinshan,Yang Zhong,Zhao Juan,Xia Feng,Liang Minxian,Mg-Gd-Y system phase diagram calculation and experimental clarification,Journal of Alloys and Compounds,450,446(2008)
[15] ZHAO Juan,LI Jianping,GUO Yongchun,YANG Zhong,LIANG Minxian,Calphad and experimental study on the new type Mg-Gd-Y phase diagram in the Mg-rich region,Rare Metal Materials and Engineering,37(2),281 (2008)(赵娟,李建平,郭永春,杨忠,杨觉明,梁民宪,新型Mg-Gd-Y合金富镁角的相图计算及实验测定,稀有金属材料与工程,37(2),281(2008))
[16] M.R.Barnerr,Recrystallization during and following hot working of magnesium alloy,Material Science Forum,5(3),419(2003)
[17] S.W.Xu,M.Y.Zheng,S.Kamado,K.Wu,The microstructural evolution and superplastic behavior at low temperatures of Mg-5.00Zn-0.92Y-0.16Zr(wt.%) alloys after hot extrusion and ECAP process,Materials Science and Engineering A,549,60(2012)
[18] LIN Dan,WANG Lei,LIU Yang,Effects of plastic deformation on precipitation behavior and tensile fracture behavior of Mg-Gd-Y-Zr alloy,Trans.Nonferrous Met Soc.China,21,2160(2011)
[19] YU Kun,LI Wenxian,WANG Richu,MA Zhengqing,Research,development and application of wrought magnesium alloys,The Chinese Journal of Nonferrous Metals,13(2),277(2003)(余琨,黎文献,王日初,马正青,变形镁合金的研究、开发及应用,中国有色金属学报,13(2),277(2003))
[20] DING Wenjiang,JIN Li,WU Wenxiang,DONG Jie,Texture and texture optimization of wrought Mg alloy,The Chinese Journal of Nonferrous Metals,21(10),2371(2011)(丁文江,靳丽,吴文祥,董杰,变形镁合金中的织构及其优化设计,中国有色金属学报,21(10),2371(2011))
[21] HOU Qingyu,Investigation on the plastic characteristics of a Mg-Gd-Y alloy,PhD thesis,Nanjing University of Science and Technology(2012)(侯清宇,Mg-Gd-Y合金的塑性变形特征研究,博士学位论文,南京理工大学(2012))
[22] YAN Zhifeng,The influence of texture on high-cycle fatigue property of AZ31B magnesium alloy,Master Degree thesis,Taiyuan University of Technology (2011)(闫志峰,织构对AZ31B镁合金板材高周疲劳性能的影响,硕士学位论文,太原理工大学(2011))
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%