在0.001~4800 s-1应变率范围,研究了Mg-3Al-2Zn-2Y合金的室温压缩性能.结果表明:合金经1300 s-1压缩后,基面与非基面的位错滑移形成平行、弯曲与缠结的混合位错组态;经1800与4800 s-1压缩后出现孪生;上述微细观变化导致合金流变应力与极限强度在0.001~1800 s-1范围具有应变率强化效应;合金经4800 s-1压缩后,出现了以再结晶晶粒与孪生晶粒共同形成的变形局域化区域,导致力学性能比1800 s-1时有所下降.
参考文献
[1] | 王小强,李全安,张兴渊.Y对AZ81镁合金组织和力学性能的影响[J].特种铸造及有色合金,2007(05):384-387. |
[2] | 刘方政,许春香,刘彦海,吕正玲.Y对AZ61镁合金金相组织和力学性能的影响[J].铸造设备研究,2008(01):15-17. |
[3] | 张金旺,许并社.Y对AZ31镁合金铸态组织和性能的影响[J].中北大学学报(自然科学版),2009(02):192-196. |
[4] | 麻彦龙,左汝林,汤爱涛,张静,潘复生.钇对铸态ZK60镁合金晶界析出相形态的影响[J].重庆大学学报(自然科学版),2005(02):51-54. |
[5] | Medyanik S N;Liu W K .[J].Journal of the Mechanics and Physics of Solids,2007,5(07):1439. |
[6] | Barnett MR .Twinning and the ductility of magnesium alloys Part I: "Tension" twins[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1-2):1-7. |
[7] | Meyers M A;Xu Y B;Xue Q et al.[J].Acta Materialia,2003,51(05):1307. |
[8] | Pérez-Prado M T;Hines J A;Vecchio K S .[J].Acta Materialia,2001,49(15):2905. |
[9] | Yang Q;Ghosh A K .[J].Acta Materialia,2006,54:5147. |
[10] | Christian J W;Mahajan S .[J].Progress in Materials Science,1995,39:1. |
[11] | Barnett M R .[J].Metallurgical and Materials Transactions,2003,34A:1799. |
[12] | Jain, A;Duygulu, O;Brown, DW;Tome, CN;Agnew, SR .Grain size effects on the tensile properties and deformation mechanisms of a magnesium alloy, AZ31B, sheet[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1/2):545-555. |
[13] | Chino, Y;Kimura, K;Mabuchi, M .Twinning behavior and deformation mechanisms of extruded AZ31 Mg alloy[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1/2):481-488. |
[14] | Barnett M R;Keshavarz K;Beor A G et al.[J].Acta Materialia,2004,52:5093. |
[15] | Zhou, F;Wright, TW;Ramesh, KT .The formation of multiple adiabatic shear bands[J].Journal of the Mechanics and Physics of Solids,2006(7):1376-1400. |
[16] | Zhou F;Wright T W;Ramesh K T .[J].Journal of the Mechanics and Physics of Solids,2006,54(05):904. |
[17] | Schoenfeld SE.;Wright TW. .A failure criterion based on material instability[J].International Journal of Solids and Structures,2003(12):3021-3037. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%