Excessive sintering of mould fluxes can readily cause defects and sticker breakouts in continuously cast strands. Studying the sintering property is important to minimize problems related to sintering arising from the use of mould fluxes in continuous casting. An effective method of measuring the apparent sintering temperature has been developed in this study. The method is based on monitoring the formation of cavities caused by melting of samples.For monitoring, the differential pressure of an inert gas flow was measured through a set volume of sample (mould flux A) held in a furnace tube. The apparent sintering temperature was defined in this test to determine sintering process. The sintering properties of fluxes with various contents of carbon black were examined along with identification of mineralogical phases and the nature of the sinter for samples of mould flux A held for one hour at different temperatures. The experimental results indicated that the apparent sintering temperature (AST) was a useful parameter to assess the threat of problems related to sinter.
参考文献
| [1] | CHI Jing-hao;GAN Yong-nian.Mould Fluxes(in Chinese)[M].沈阳:东北大学出版社,1992 |
| [2] | Pinheiro C A;Samarasekera I V;Brimacombe J K .Mold Flux for CC of Steel[J].Ironmaking and Steelmaking,1995,22(02):37. |
| [3] | Kenneth C. MILLS;Alistair B. FOX .The Role of Mould Fluxes in Continuous Casting―So Simple Yet So Complex[J].ISIJ International,2003(10):1479-1486. |
| [4] | Perrot C;Pontoire J N;Marchionni C.Several Slag Rims and Lubrication Behaviours in Slab Casting[J].Rev Met Paris,2005(02):887. |
| [5] | WANG Ai-lan;LIU Ping;YUN Xia .Analysis of the Slag Ring on Mould (in Chinese)[J].Science & Technology of Baotou Steel(Group) Corporation,2006,32(Supplement):36. |
| [6] | 吴杰,刘振清.连铸结晶器保护渣渣圈的研究[J].包头钢铁学院学报,2001(03):266-267,271. |
| [7] | Sardemann;Hans Schrewe .The Influence of Casting Powder on the Formation of Cracks in Continuous Slab Casting[J].Steelmaking Conference Processings,1991,74(04):719. |
| [8] | Moore J A;Phillips R J;Gibbs T R .An Overview for the Requirements of Continuous Casting Mold Fluxes[J].Steelmaking Conference Processings,1991,74(04):615. |
| [9] | Lenel F V.Powder Metallurgy Principle and Applications[M].Princeton N J:Metal Powder Industries Federation,1980 |
| [10] | Thummler F;Oberacker R.Introduction to Powder Metallurgy[M].Oxford:Oxford Science Publications,1993 |
| [11] | ZENG Jian-hua .Development of Mould Fluxes for Bloom Continuous Casting of High Carbon Steel(in Chinese)[D].重庆:重庆大学,2003. |
| [12] | 段大福.炭质材料对连铸保护渣烧结性能的影响[J].耐火材料,2004(05):339-342. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%