基于三维六向编织复合材料的细观结构,假设第六向纱线的截面形状为菱形,建立了三维六向编织复合材料的渐进损伤有限元模型.采用Linde等提出的失效准则,引入周期性位移边界条件,对三维六向编织复合材料的纵向拉伸应力-应变行为进行了渐进损伤数值模拟,讨论了单胞模型在纵向拉伸载荷作用下的细观损伤起始、扩展和最终失效的演化过程,并预测了材料的拉伸强度.在此基础上,进一步研究了编织角、纤维体积分数和编织纱水平取向角等参数对材料纵向拉伸力学性能的影响规律.研究结果表明,三维六向编织复合材料的轴向纱线拉伸断裂是导致其破坏的最主要因素.所得数值结果与现有试验值吻合较好,验证了该模型的有效性,为更深入研究此类材料的力学性能奠定了基础.
参考文献
| [1] | Chamis C C.Mechanics of composites materials:Past,present and future[J].Journal of Composites Technology andResearch,1989,11(1):3-14. |
| [2] | 卢子兴,杨振宇,李仲平.三维编织复合材料力学行为研究进展[J].复合材料学报,2004,21(2):1-7.Lu Zixing,Yang Zhenyu,Li Zhongping.Development of investigation into mechanical behavior of three-dimensional braided composites[J].Acta Materiae Compositae Sinica,2004,21(2):1-7. |
| [3] | Mouritza A P,Bannisterb M K,Falzonb P J,et al.Review of applications for advanced three-dimensional fiber textile composites[J].Composites:Part A,1999,30(12):1445-1461. |
| [4] | Quek S C,Waas A,Shahwan K W,et al.Compressive response and failure of braided textile composites Ⅰ:Experiments[J].International Journal of Nonlinear Mechanics,2004,39:635-648. |
| [5] | 卢子兴,刘振国,麦汉超,等.三维编织复合材料强度的数值预报[J].北京航空航天大学学报,2002,28(5):563-565.Lu Zixing,Liu Zhenguo,Mai Hanchao,et al.Numerical prediction of strength for 3D braided composites[J].Journal of Beijing University of Aeronautics and Astronautics,2002,28(5):563-565. |
| [6] | 李典森,卢子兴,卢文书.三维四向编织复合材料刚度和强度的理论预测[J].应用数学和力学,2008,29(2):149-156.Li Diansen,Lu Zixing,Lu Wenshu.Theoretical prediction of the stiffness and strength of three-dimensional and fourdirectional braided composites[J].Applied Mathematics and Mechanics,2008,29(2):149-156. |
| [7] | Gu Bohong.Prediction of the uniaxial tensile curve of 4-step 3-dimensional braided perform[J].Composite Structures,2004,64(2):235-241. |
| [8] | Zeng T,Fang D N,Li M,et al.Predicting the nonlinear response and failure of 3D braided composites[J].Materials Letters,2004,58(26):3237-3241. |
| [9] | Dong J W,Feng M L.Asymptotic expansion homogenization for simulating progressive damage of 3D braided composites[J].Composite Structures,2010,92(4):873-882. |
| [10] | 庞宝君,杜善义,韩杰才,等.三维多向编织复合材料非线性本构行为的细观数值模拟[J].复合材料学报,2000,17(1):98-102.Pang Baojun,Du Shanyi,Han Jiecai,et al.Nonlinear behavior of the constitutive simulation of mesoscopic computational mechanics for three-dimensional multidirectional braided composites[J].Acta Materiae Compositae Sinica,2000,17(1):98-102. |
| [11] | Fang G D,Liang J,Wang B L.Progressive damage and nonlinear analysis of 3D four-directional braided composites under unidirectional tension[J].Composite Structures,2009,89(1):126-133. |
| [12] | 张超,许希武,毛春见.三维编织复合材料渐进损伤模拟及强度预测[J].复合材料学报,201 1,28(2):222-230.Zhang Chao,Xu Xiwu,Mao Chunjian.Progressive damage simulation and strength prediction of 3D braided composites[J].Acta Materiae Compositae Sinica,2011,28(2):222-230. |
| [13] | 徐焜,许希武,汪海.三维六向编织复合材料力学性能的实验研究[J].复合材料学报,2005,22(6):144-149.Xu Kun,Xu Xiwu,Wang Hai.Experimental investigation of the mechanical properties of 3D 6-directional braided composites[J].Acta Materiae Compositae Sinica,2005,22(6):144-149. |
| [14] | 郭颖,吴林志,杨银环,等.三维六向编织复合材料拉伸性能的实验研究[J].宇航学报,2012,33(5):669-674.Guo Ying,Wu Linzhi,Yang Yinhuan,et al.Experimental investigation on on tensile mechanical properties of 3D sixdirectional braided composite[J].Journal of Astronautics,2012,33(5):669-674. |
| [15] | 李典森,卢子兴,陈利,等.三维六向编织复合材料弹性性能理论预测[J].复合材料学报,2006,23(4):133-141.Li Diansen,Lu Zixing,Chen Li,et al.Theoretical prediction of the elastic properties for three-dimensional and sixdirectional braided composites[J].Acta Materiae Compositae Sinica,2006,23(4):133-141. |
| [16] | Linde P,Pleitner J,Boer H D,et al.Modelling and simulation of fiber metal laminates[C]//ABAQUS User's Conference.Boston,Massachusetts:[s.n],2004:421-439. |
| [17] | 卢子兴,徐强,王伯平,等.含缺陷平纹机织复合材料拉伸力学行为数值模拟[J].复合材料学报,2011,28(6):200-207.Lu Zixing,Xu Qiang,Wang Boping,et al.Numerical simulation of plain weave composites with defects under unidirectional tension[J].Acta Materiae Compositae Sinica,2011,28(6):200-207. |
| [18] | 李嘉禄,刘谦.三维编织复合材料中纤维束横截面形状的研究[J].复合材料学报,2001,18(2):9-13.Li Jialu,Liu Qian.Study on fiber tows cross-sect ion in 3-D braided composites[J].Acta Materiae Compositae Sinica,2001,18(2):9-13. |
| [19] | 刘景艳,陈利.三维六向编织预成型件中纱线的交织结构[J].天津工业大学学报,2006,25(6):5-8.Liu Jingyan,Chen Li.Microstructure of 3D six-directional braided preforms[J].Journal of Tianjin Polytechnic University,2006,25(6):5-8. |
| [20] | Xia Z H,Zhang Y F,Fernand E.A unified periodical boundary conditions for representative volume elements of composites and applications[J].International Journal of Solid & Structure,2003,40(8):1907-1921. |
| [21] | Xia Zihui,Zhou Chuwei,Yong Qiaoling,et al.On selection of repeated unit cell model and application of unified periodic boundary conditions in micro-mechanical analysis of composites[J].International Journal of Solid & Structure,2006,43(2):266-278. |
| [22] | 夏彪,卢子兴.三维编织复合材料热物理性能的有限元分析[J].航空学报,2011,32(6):1040-1049.Xia Biao,Lu Zixing.Finite element analysis on thermophysical properties of 3D braided composites[J].Acta Aeronautica et Astronautica Sinica,2011,32(6):1040-1049. |
| [23] | 李东风,王浩静,贺福,等.T300和T700炭纤维的结构与性能[J].新型炭材料,2007,22(1):59-64.Li Dongfeng,Wang Haojing,He Fu,et al.Structure and properties of T300 and T700 carbon fibers[J].New Carbon Materials,2007,22(1):59-64. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%