对水力旋流器内流场进行了数值模拟.旋流器内液相和气相的湍流模拟采用了雷诺应力模型(RSM),边界条件采用速度进口、压力出口.在同一工况下选用三维模型及二维简化模型、分别用VOF模型及刚盖法对空气柱进行处理,就空气柱形成、切向及轴向速度与相同条件下试验测量的结果进行比较.结果表明,三维模型计算结果较二维简化模型与实验值吻合得更好,但二维简化模型在降低精度不大的前提下大大减少了计算时间.对空气柱的处理,选用VOF模型得到的结果更准确,而刚盖法减少了计算用时.
参考文献
| [1] | N Rhodes;K A Pericleous;S N Drake.The Prediction of Hydrocyclone Performance with a Mathematical Model[A].Oxford,England,1987:51-58. |
| [2] | K T Hsieh;R K Rajamani .Mathematical Model of the Hydrocyclone Based on Physics of Fluid Flow[J].AICHE Journal,1991,37(05):735-746. |
| [3] | T Dyakowski;R A Williams .Modelling Turbulent Flow Within a Small Diameter Hydrocyclone[J].Chemical Engineering Science,1993,28:1143-1152. |
| [4] | S. Schuetz;G. Mayer;M. Bierdel .Investigations on the flow and separation behaviour of hydrocyclones using computational fluid dynamics[J].International Journal of Mineral Processing,2004(2/4):229-237. |
| [5] | Jose A. Delgadillo;Raj K. Rajamani .A comparative study of three turbulence-closure models for the hydrocyclone problem[J].International Journal of Mineral Processing,2005(4):217-230. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%