研究了交联剂用量对吸油膨胀橡胶性能的影响,采用傅里叶转变红外光谱(FT-IR)、热失重分析(TGA)、饱和吸油倍率和吸油速率对加入不同过氧化二异丙苯(DCP)剂量的吸油橡胶的结构、热性能、饱和吸油倍率和吸油速率进行表征.结果表明,随着DCP加入量的增大,参与副反应的丙烯酸丁酯有所增加,吸油橡胶的耐热性能和饱和吸油倍率得到有效提高；而在相同时间段里的吸油速率则呈现出先升高后降低的趋势.
参考文献
| [1] | Zhou MH.;Cho WJ. .Oil absorbents based on styrene-butadiene rubber[J].Journal of Applied Polymer Science,2003(7):1818-1824. |
| [2] | 陈培,邹华,张立群,田明.吸油膨胀橡胶复合材料研究进展[J].特种橡胶制品,2010(05):61-65. |
| [3] | F. A. AISIEN;F. K. HYMORE;R. O. EBEWELE .POTENTIAL APPLICATION OF RECYCLED RUBBER IN OIL POLLUTION CONTROL[J].Environmental Monitoring and Assessment: An International Journal,2003(2):175-190. |
| [4] | Liu, N;Sun, G;Gaan, S;Rupper, P .Controllable Surface Modifications of Polyamide by Photo-Induced Graft Polymerization Using Immobilized Photo-Initiators[J].Journal of Applied Polymer Science,2010(6):3629-3637. |
| [5] | Ouyang Q;Cheng L;Wang HJ;Li KX .Mechanism and kinetics of the stabilization reactions of itaconic acid-modified polyacrylonitrile[J].Polymer Degradation and Stability,2008(8):1415-1421. |
| [6] | Amit K. Naskar;Robert A. Walker;Sarah Proulx .UV assisted stabilization routes for carbon fiber precursors produced from melt-processible polyacrylonitrile terpolymer[J].Carbon: An International Journal Sponsored by the American Carbon Society,2005(5):1065-1072. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%