通过显微组织观察和拉伸试验研究了不同轧制方式（换向轧制和单向轧制）与3种热处理工艺对TC4-DT钛合金板材各向力学性能的影响。结果表明：与单向轧制相比,换向轧制减小了组织的各向异性,使得钛合金的各向力学性能一致;低于相变点的固溶时效热处理得到了双相组织,使板材具有更好的综合力学性能。
Effects of rolling processes（cross rolling and unidirectional rolling） and 3 kinds of heat treatment processes on mechanical properties in every direction of TC4-DT titanium alloy sheets were investigated through microstructure observation and tensile tests.The results show that compared with the unidirectional rolling,cross rolling reduced the anisotropy of structure which made the mechanical properties of Ti alloy more uniform.Dual phase microstructure by solution and aging treatment under the temperature closed to transition point led to the higher comprehensive mechanical properties.
参考文献
| [1] | 于兰兰,毛小南,李辉.温度对TC4-DT损伤容限型钛合金疲劳裂纹扩展行为的影响[J].稀有金属快报,2007(12):20-23. |
| [2] | 朱知寿,马少俊,王新南,童路,吴学仁,赵永庆,曲恒磊.TC4-DT损伤容限型钛合金疲劳裂纹扩展特性的研究[J].钛工业进展,2005(06):10-13. |
| [3] | 洪权,张振祺,杨冠军,罗国珍.Ti600合金的热机械加工工艺与组织性能[J].金属学报,2002(z1):135-137. |
| [4] | 周伟,曲恒磊,赵永庆,李辉,冯亮,陈军,郭红超,朱知寿.热处理对TC4合金组织与性能的影响[J].热加工工艺,2005(08):26-27. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%