研究了采用悬浮熔炼(常规铸态)和不同冷却速度的单辊快淬方法制备的Mm(NiCoMnAl)5型稀土系贮氢合金负极活性材料对金属氢化物镍(MH/Ni)电池性能的影响.结果表明,采用不同方法制备的合金对整个电池活化后的容量和内阻影响很小,但是常规铸态合金在退火后降低了电池的放电电压平台,快淬合金随着冷凝速率的提高,放电平台呈降低趋势.对循环充放电过程中电池内阻、循环到一定次数时负极贮氢合金的粒度和正极内铝含量的测试结果表明,铸态不退火合金较差的抗粉化性和较差的耐腐蚀性使电池的循环性能较差,经退火后其性能均有所提高,快淬合金使电池的循环性能优于常规铸态合金.
参考文献
[1] | 马建新,潘洪革,李寿权,陈长聘.RE(NiCoMnAl)5电极合金中RE成分对微结构和电化学性能的影响[J].稀有金属材料与工程,2002(03):217-220. |
[2] | Hu WK.;Jeon SW.;Lee JY.;Kim DM. .Effect of annealing treatment on electrochemical properties of Mm-based hydrogen storage alloys for Ni/MH batteries[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,1998(1/2):255-264. |
[3] | 钱存富,杜昊,王洪祥.LaNi5型储氢材料最大储氢量的讨论[J].稀有金属材料与工程,2000(01):25-27. |
[4] | 李建文,陈云贵,涂铭旌.热处理对LPC(NiCoAlMn)5.0贮氢合金电化学性能的影响[J].稀有金属材料与工程,2002(05):397-400. |
[5] | Li Rong;Wu Jianmin;Wang Xinlin .[J].Journal of Alloys and Compounds,2000,311:40. |
[6] | Zhang LY .Electrochemical characteristics of AB sub 5 -type hydrogen storage alloys solidified at different cooling rates[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,1999(0):621-625. |
[7] | Li Chuanjian;Wang Xinlin;Wang Chongyu .[J].Journal of Power Sources,1998,74:62. |
[8] | Zhang S K;Shua K Y;Lei Y Q .[J].International Journal of Hydrogen Energy,2003,28:977. |
[9] | Patrick Bernarde .[J].Journal of the Electrochemical Society,1998,145:456. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%