The influences of pre-ageing temperature and natural ageing time on subsequent artificial age hardening behavior and precipitation sequence of new type Al-1.01Mg-0.68Si-1.78Cu alloy were investigated by hardness test, differential scanning calorimetry (DSC) test and transmission electronic microscopy (TEM) observations. When pre-ageing temperature is 20°C (natural ageing), the peak hardness of subsequent artificial aged alloy is lower than that of T6 treated alloy (negative effect), while a positive effect appears when pre-ageing temperature is above 80°C. The size of needlelike β-precipitate in subsequent artificial aged alloy is much coarser when pre-ageing temperature is 20°C, which causes a decrease in peak-hardness. The positive effect occurs again when natural ageing time is longer than 3 weeks. There are seven exothermic peaks in DSC curve of as-quenched alloy, while the number and height of exothermic peak decrease with increasing pre-ageing temperature and natural ageing time.
参考文献
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%