以四氯化钛为原料,制备纳米TiO2溶胶,再采用浸渍-提拉法在纯Mg表面制得TiO2薄膜,随后涂有TiO2的纯Mg分别在100、300、500℃下热处理2h。采用XRD、DSC/TG、FT-IR、FE-SEM表征不同热处理条件下试样的组成和结构;通过动电位极化表征试样的耐蚀性,考察温度对TiO2涂层纯Mg试样耐蚀性的影响。结果表明TiO2涂层可提高纯Mg的耐蚀性;100℃热处理试样具有最优的耐蚀性,其腐蚀电流密度为4.5×10-3 mA/cm2,较纯Mg的3.256mA/cm2明显下降;随着温度的升高,试样的耐蚀性趋于下降。并对TiO2涂层的耐蚀机理进行了讨论。
Nanometer TiO2,prepared by sol-gel technique using titanium tetrachloride and ammonia water as raw materials,was coated on pure magnesium by the method of dip-coating,followed by heat treatment at 100,300,500℃ for 2h,respectively.The phases and microstructure of the coated-TiO2 magnesium at different heat treatment temperatures were characterized using XRD,TG/DSC,FT-IR,FE-SEM.Electrochemical polarization tests were performed to investigate the effect of heat treatment temperature on the corrosion resistance of coated-TiO2 pure magnesium.The results show that TiO2 coating can improve the corrosion resistance of pure magnesium,that 100℃-treated TiO2 coating with the corrosion current density of 4.5×10-3mA/cm2,compared with a much higher 3.256mA/cm2 of pure magnesium,has the optimal anti-corrosion among the experiment coated-TiO2 samples,and that the corrosion resistance decreases with the increased heat treatment temperatures.Also,the anti-corrosion mechanism of TiO2 coating was discussed.
参考文献
| [1] | 曾瑞.纳米二氧化钛的特性及应用[J].现代涂料与涂装,2003(02):32-34. |
| [2] | Yu JC.;Yu JU.;Ho WK.;Jiang ZT.;Zhang LH. .Effects of F- doping on the photocatalytic activity and microstructures of nanocrystalline TiO2 powders[J].Chemistry of Materials,2002(9):3808-3816. |
| [3] | 邓晓燕,崔作林,杜芳林,彭春.纳米二氧化钛的热分析表征[J].无机材料学报,2001(06):1089-1093. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%