{"currentpage":1,"firstResult":0,"maxresult":10,"pagecode":5,"pageindex":{"endPagecode":1,"startPagecode":1},"records":[{"abstractinfo":"锌铬涂覆技术在国内日趋成熟,已被很多制造企业所应用.根据生产现场的需要,通过试验分析,探究出将镀锌零件改制成合格的锌铬涂层零件的工艺案例,解决了镀锌零件上的锌层对锌铬涂层质量的影响问题.采用由硫酸、氯化钠、OP乳化剂组成的酸洗褪锌工艺,须先以抛丸破坏原有锌镀层的完整性,虽成本低,但存在氢脆的危险,不适用于高强度连接件和弹性类零件.采用由氢氧化钠和亚硝酸钠组成的溶液进行碱煮的工艺,适用于所有铁基材料褪锌后涂覆锌铬涂层.2种工艺处理后的零件均满足耐20％硝酸铵快速腐蚀试验时间＞1.5 h的要求.","authors":[{"authorName":"刘国锋","id":"2ba84585-47b6-4bcb-a94a-62ebc2e726f1","originalAuthorName":"刘国锋"},{"authorName":"赵珺","id":"cffa42f3-01ac-44ff-a90d-e7ad3b7a14dc","originalAuthorName":"赵珺"},{"authorName":"刘剑钊","id":"1f02cf74-8798-49ef-b45d-81a49fda2a41","originalAuthorName":"刘剑钊"},{"authorName":"马旭红","id":"48131fae-56ab-4976-bd9f-83838501c158","originalAuthorName":"马旭红"}],"doi":"","fpage":"65","id":"a0a820f1-2149-4811-9a94-8729069af14e","issue":"11","journal":{"abbrevTitle":"DDYTS","coverImgSrc":"journal/img/cover/DDYTS.jpg","id":"21","issnPpub":"1004-227X","publisherId":"DDYTS","title":"电镀与涂饰   "},"keywords":[{"id":"84202bb0-7eca-4610-9074-d9636df76b2c","keyword":"镀锌件","originalKeyword":"镀锌件"},{"id":"79310a9c-e0cb-4f43-b7b1-e40d1cf0b865","keyword":"<span style=\"color:red\">返工</span>","originalKeyword":"返工"},{"id":"f8790044-2ecb-4a49-adf1-0ef74c11ae73","keyword":"锌铬涂层","originalKeyword":"锌铬涂层"},{"id":"92b8b0fd-dbfe-4d38-af9f-b4e4257a3922","keyword":"耐腐蚀性","originalKeyword":"耐腐蚀性"}],"language":"zh","publisherId":"ddyts201111017","title":"镀锌件<span style=\"color:red\">返工</span>涂覆锌铬涂层工艺探讨","volume":"30","year":"2011"},{"abstractinfo":"合成了两种分别含有叔酯键和叔醚键的环氧化合物EP-1和EP-2,其结构通过红外光谱、氢核磁共振谱及环氧当量测定等方法得到证实.EP-1与已有商品ERL-4221以环氧物质的量比1:1混合组成EP-3.EP-2和EP-3用酸酐类固化剂HMPA固化.TGA测试表明它们具有理想的起始热分解温度(IDT=210～220℃),显著低于现在普遍应用的环氧底部填充料ERL-4221(IDT=310℃).它们的粘结强度和玻璃化转变温度Tg在<span style=\"color:red\">返工</span>温度(225℃)老化数分钟后迅速降低,可以满足当前微电子倒装芯片封装对可返修工艺的要求.","authors":[{"authorName":"童凌杰","id":"42e898b0-20a3-4d37-ba9b-187301b82ef6","originalAuthorName":"童凌杰"},{"authorName":"王鹏","id":"644debdf-198a-4d74-8add-6f9229a4af38","originalAuthorName":"王鹏"},{"authorName":"肖斐","id":"c131dc63-04fa-4247-add4-0334d9b6a6e3","originalAuthorName":"肖斐"}],"doi":"10.3969/j.issn.1007-4252.2006.02.016","fpage":"147","id":"410573c1-1aec-41a0-874f-b13a8a7c40d8","issue":"2","journal":{"abbrevTitle":"GNCLYQJXB","coverImgSrc":"journal/img/cover/GNCLYQJXB.jpg","id":"34","issnPpub":"1007-4252","publisherId":"GNCLYQJXB","title":"功能材料与器件学报   "},"keywords":[{"id":"e9a1a483-a28b-40cc-ac22-ea8400df093f","keyword":"可<span style=\"color:red\">返工</span>","originalKeyword":"可返工"},{"id":"d9b1e661-8670-4eb8-baa4-794e0636f6cc","keyword":"底部填充料","originalKeyword":"底部填充料"},{"id":"3ce5685a-6b2c-4bf6-b919-3ab738d9521f","keyword":"环氧树脂","originalKeyword":"环氧树脂"},{"id":"cdb37971-f0b5-4993-8d33-fb71309b1c1d","keyword":"倒装芯片","originalKeyword":"倒装芯片"},{"id":"c06ba94f-500c-4cae-98bc-08fd38fd1946","keyword":"热降解","originalKeyword":"热降解"}],"language":"zh","publisherId":"gnclyqjxb200602016","title":"新型可<span style=\"color:red\">返工</span>环氧底部填充料的合成和性能","volume":"12","year":"2006"},{"abstractinfo":"分析了ABS塑料喷漆件<span style=\"color:red\">返工</span>的原因和影响因素,指出了再涂率高的主要原因为流挂、颗粒、素材不良和针孔,并从生产管理、设备、环境、原材料、工艺改进等方面提出了相应的改进措施,取得了一定的成效.","authors":[{"authorName":"洪满华","id":"66341ab6-a168-4bc2-b835-1866f94be7c6","originalAuthorName":"洪满华"}],"doi":"10.3969/j.issn.1001-1560.2001.06.025","fpage":"51","id":"d4f87d0b-ffb1-4afd-b357-5925c1f46e15","issue":"6","journal":{"abbrevTitle":"CLBH","coverImgSrc":"journal/img/cover/CLBH.jpg","id":"7","issnPpub":"1001-1560","publisherId":"CLBH","title":"材料保护"},"keywords":[{"id":"83cd4309-1a02-42d4-9fdf-98aa7f0e2b94","keyword":"ABS塑料件","originalKeyword":"ABS塑料件"},{"id":"1f0331f9-c975-4ed5-961e-572e925d3185","keyword":"再涂率","originalKeyword":"再涂率"},{"id":"2a73a081-db2e-4931-8beb-d939bea4c32f","keyword":"成效","originalKeyword":"成效"}],"language":"zh","publisherId":"clbh200106025","title":"降低ABS塑料喷漆件再涂率的方法","volume":"34","year":"2001"},{"abstractinfo":"介绍了黄铜镀层化学着色和电化学着色2种方法.在总结生产实践经验的基础上,指出黄铜镀层着色工艺的选择应该综合考虑色膜的色相、着色时间、着色剂的稳定性及其氧化能力等方面.分别提出了2种着色方法的工艺规范、工艺流程和工艺控制要点,以列表的形式汇总了着色工艺的常见故障和解决办法.同时,介绍了着色膜的质量验收和不合格品的<span style=\"color:red\">返工</span>处理方法.","authors":[{"authorName":"罗福林","id":"39a21f32-1dac-443e-9507-4a721d97d67f","originalAuthorName":"罗福林"}],"doi":"10.3969/j.issn.1004-227X.2006.01.006","fpage":"21","id":"1cada5b2-e985-4edd-bdb2-1ac065bfe896","issue":"1","journal":{"abbrevTitle":"DDYTS","coverImgSrc":"journal/img/cover/DDYTS.jpg","id":"21","issnPpub":"1004-227X","publisherId":"DDYTS","title":"电镀与涂饰   "},"keywords":[{"id":"3b54a6ba-7bb7-404b-bc3f-9a00766fba2d","keyword":"黄铜镀层","originalKeyword":"黄铜镀层"},{"id":"5a8b3a07-b63f-433e-b7ab-4d3b0cd67f16","keyword":"着色","originalKeyword":"着色"},{"id":"81a93626-5201-4fa9-ab19-f860bc676600","keyword":"化学着色","originalKeyword":"化学着色"},{"id":"fcc28ae1-4807-47d1-a21c-b8ae60664f3c","keyword":"电化学着色","originalKeyword":"电化学着色"}],"language":"zh","publisherId":"ddyts200601006","title":"黄铜镀层着色工艺的选择和应用","volume":"25","year":"2006"},{"abstractinfo":"钢制安全壳是AP1000核电站的第三道安全屏障,也是实现非能动安全功能的换热界面,其表面的涂层是确保实现其功能不可分割的重要组成部分.CV涂层是保障实现产品功能和表面美观的重要途径.介绍了AP1000 CV建造和涂层施工逻辑,从涂层自身特性、建造方式和AP1000整体施工等方面对CV涂层特点进行分析,对改善后续AP1000 CV涂层施工质量和减少<span style=\"color:red\">返工</span>提出改进措施.","authors":[{"authorName":"王国彪","id":"e57e7ab1-30a1-4e46-ad94-be4a956c6082","originalAuthorName":"王国彪"},{"authorName":"晏桂珍","id":"c3e50bbd-45f9-47da-8063-88858f2f9555","originalAuthorName":"晏桂珍"},{"authorName":"王洋","id":"798647ef-96cf-480f-ba97-c4184223926d","originalAuthorName":"王洋"},{"authorName":"杨中伟","id":"943145f1-90dc-4eaf-96c4-85c0685909fa","originalAuthorName":"杨中伟"},{"authorName":"王厚高","id":"dc5b1ebc-74bd-460e-afc1-30b2366e75fb","originalAuthorName":"王厚高"},{"authorName":"丁海明","id":"51eeea8f-3188-4543-995c-f0d0b0db37d9","originalAuthorName":"丁海明"}],"doi":"10.3969/j.issn.1001-3849.2015.12.005","fpage":"18","id":"70ab4473-16d2-491d-b6db-a7778223b718","issue":"12","journal":{"abbrevTitle":"DDYJS","coverImgSrc":"journal/img/cover/DDYJS.jpg","id":"20","issnPpub":"1001-3849","publisherId":"DDYJS","title":"电镀与精饰   "},"keywords":[{"id":"41673ff9-ca7e-43e7-b3ce-6a19502e5da5","keyword":"AP1000","originalKeyword":"AP1000"},{"id":"589349f7-8572-4e2f-be21-0da3de7ac26d","keyword":"钢制安全壳","originalKeyword":"钢制安全壳"},{"id":"1d1088ad-8e25-4a20-af53-416e8aa0c84b","keyword":"无机富锌底漆","originalKeyword":"无机富锌底漆"},{"id":"adfd0847-ff0d-49db-a4ab-7b4b5c0d0018","keyword":"环氧面漆","originalKeyword":"环氧面漆"},{"id":"2377ffae-a973-403d-b20b-ed9aa317ac0b","keyword":"模块化施工","originalKeyword":"模块化施工"}],"language":"zh","publisherId":"ddjs201512005","title":"AP1000核电站钢制安全壳涂层工艺改进","volume":"37","year":"2015"},{"abstractinfo":"针对橡胶金属复合制品铵盐镀锌后蓝白钝化膜防腐性能不佳的问题,选用Seal 300w、LD-5962、LD-5961、Slotofin-11等4种封闭剂对其进行封闭处理.对比了各封闭剂对橡胶金属复合制品耐蚀性、粘合性、户外耐候性、韧性以及可<span style=\"color:red\">返工</span>性等性能的影响.结果表明,封闭剂LD-5962和Slotofin-11较适用于橡胶金属复合制品的白锌封闭处理.","authors":[{"authorName":"邓建青","id":"8f3c9235-0923-46f1-8ca3-35084b6a9635","originalAuthorName":"邓建青"},{"authorName":"李斌","id":"0c7d87ad-3b73-4b9b-a8e6-f20634d6039c","originalAuthorName":"李斌"},{"authorName":"殷相胜","id":"1afcb12a-fb50-408d-a084-ba5c94858ca2","originalAuthorName":"殷相胜"}],"doi":"","fpage":"557","id":"822e8647-5595-4d64-9acb-64bbc63846fb","issue":"13","journal":{"abbrevTitle":"DDYTS","coverImgSrc":"journal/img/cover/DDYTS.jpg","id":"21","issnPpub":"1004-227X","publisherId":"DDYTS","title":"电镀与涂饰   "},"keywords":[{"id":"5f179b12-87dc-4694-802a-ebd0f21bab8d","keyword":"橡胶金属复合件","originalKeyword":"橡胶金属复合件"},{"id":"7a57fa5e-1a39-454c-8eb2-c40c1698ebd7","keyword":"镀锌层","originalKeyword":"镀锌层"},{"id":"f9751b59-1c4e-4a9a-8c3c-0f9dcf018644","keyword":"蓝白钝化","originalKeyword":"蓝白钝化"},{"id":"073fd7b2-4d3a-4905-b701-9b626bff88a3","keyword":"封闭","originalKeyword":"封闭"},{"id":"db3fae54-964e-4ca6-a8fc-5d3cc89c4268","keyword":"耐蚀性","originalKeyword":"耐蚀性"}],"language":"zh","publisherId":"ddyts201413005","title":"橡胶金属复合制品镀锌层蓝白钝封闭工艺研究","volume":"33","year":"2014"},{"abstractinfo":"对铜及铜合金化学抛光工艺进行了研究,考察了低浓度硝酸体系和双氧水体系对铜及其合金的抛光亮度、腐蚀失重以及对环境污染程度的影响.结果表明,低浓度硝酸体系抛光亮度高,适用范围广,对环境的污染较传统三酸体系少,虽然对铜及铜合金有一定的腐蚀,但<span style=\"color:red\">返工</span>对工件的尺寸影响不大,适用于冰箱、空调器等的蒸发管的抛光.双氧水抛光体系对铜及其合金腐蚀轻微,对环境的污染更少,但成本相对较高,适于对加工尺寸要求严格的铜及铜合金电子元件的化学抛光.","authors":[{"authorName":"农兰平","id":"6191a7b9-787e-4315-a479-e7cf43657a71","originalAuthorName":"农兰平"},{"authorName":"李金莲","id":"cdc2492d-8605-4fa9-858b-050802d3df14","originalAuthorName":"李金莲"},{"authorName":"巩育军","id":"69c62ad5-765c-46ff-b085-35f4c22bb0b6","originalAuthorName":"巩育军"}],"doi":"","fpage":"40","id":"217fbead-ddf8-4d55-b213-210c77b283c2","issue":"8","journal":{"abbrevTitle":"DDYTS","coverImgSrc":"journal/img/cover/DDYTS.jpg","id":"21","issnPpub":"1004-227X","publisherId":"DDYTS","title":"电镀与涂饰   "},"keywords":[{"id":"3d8e0916-ca1e-4d08-abb0-11f2003eb688","keyword":"铜及铜合金","originalKeyword":"铜及铜合金"},{"id":"c6b18b1a-50a5-4fbf-822f-d6670e8c02b0","keyword":"化学抛光","originalKeyword":"化学抛光"},{"id":"24d6fed5-e3b8-4338-afa3-fb04f21f8a7f","keyword":"硝酸","originalKeyword":"硝酸"},{"id":"fc748cb1-b5d3-4233-beae-2d7dc4995daa","keyword":"双氧水","originalKeyword":"双氧水"}],"language":"zh","publisherId":"ddyts201108011","title":"铜及铜合金不同化学抛光工艺研究","volume":"","year":"2011"},{"abstractinfo":"在生产中阴极电泳生产线经常出现持续的电泳膜层增厚、外观粗糙等问题,造成电泳打磨<span style=\"color:red\">返工</span>量增加,电泳漆消耗量上升,从而影响到面漆后的外观质量.经过对电泳槽化学参数、电泳物理参数以及油漆材料的质量、细菌的检测分析发现,电泳系统孳生了细菌的生长,使得阴极电泳涂装生产线出现电泳漆膜外观粗糙、膜层增厚等问题.通过增设去离子水装置以及紫外线杀菌装置,定期投加杀菌剂,电泳漆ED5用磺酸代替乳酸,ED6用无机酸代替有机酸,有效地防止了细菌的生长.经过改进,电泳漆膜各项性能达到质量要求,面漆外观质量得到了提高.","authors":[{"authorName":"宋建港","id":"a6184562-459b-4237-8151-875ddd6b802f","originalAuthorName":"宋建港"},{"authorName":"许慎","id":"53f936e1-368f-4bcd-9c24-e961c753defb","originalAuthorName":"许慎"},{"authorName":"畅继来","id":"cfbf8aba-1ce4-404e-81e5-f9ff69d57f16","originalAuthorName":"畅继来"}],"doi":"10.3969/j.issn.1001-1560.2004.01.018","fpage":"48","id":"e69274fc-014e-4e3c-a0e2-b24b753c48b8","issue":"1","journal":{"abbrevTitle":"CLBH","coverImgSrc":"journal/img/cover/CLBH.jpg","id":"7","issnPpub":"1001-1560","publisherId":"CLBH","title":"材料保护"},"keywords":[{"id":"2d431379-6bab-42af-826c-f7d577d5960c","keyword":"阴极电泳","originalKeyword":"阴极电泳"},{"id":"3a688c4c-ca3b-43e8-8395-ec6295235d11","keyword":"细菌","originalKeyword":"细菌"},{"id":"3752c954-c585-4cd0-be03-0247a0b31074","keyword":"涂膜粗糙","originalKeyword":"涂膜粗糙"},{"id":"da83a832-a80e-48fe-8103-fbad5520a6d1","keyword":"涂膜过厚","originalKeyword":"涂膜过厚"}],"language":"zh","publisherId":"clbh200401018","title":"细菌孳生对阴极电泳系统的危害及防治方法","volume":"37","year":"2004"}],"totalpage":1,"totalrecord":8}