对煅烧的片麻岩云母采用不同的机械开片方式处理后,与伟晶岩云母鳞片混合制得复合云母纸,研究不同开片方式对片麻岩复合云母纸拉伸强度的影响.结果表明:研磨方式更适合于片麻岩云母的开片处理,当研磨开片处理时间为15 min,片麻岩云母掺加量为9%时,复合云母纸的拉伸强度达到最大值4.8 N/cm.
A composite mica paper was prepared by mixing calcined gneiss mica treated by different me-chanical delamination method and pegmatite mica, and the effects of different treatments of gneiss mica on the tensile strength of the composite mica paper were studied. The results show that the grinding treat-ment is more suitable for the delamination of gneiss mica. When the grinding time is 15 min, the gneiss mica content is 9% , the tensile strength of the composite mica paper attains its maximum value 4.8 N/cm.
参考文献
[1] | 李明.云母片麻岩风化料填筑高速公路路基的应用研究[J].科技信息,2010(23):356,300. |
[2] | 高怀义.滑石白云母片岩和白云母斜长石片岩用做建筑陶瓷的可行性研究[J].非金属矿工业导刊,1991(03):31-32. |
[3] | Gupta A;Pate M.Mica Schist Particulates for Composites[J].Journal of Materials Science Letters,1988(07):1021-1023. |
[4] | 张建,丁建宁,王权,张华中.范德华力对硅基微悬臂梁抗粘附稳定性的影响[J].机械强度,2007(06):923-926. |
[5] | 张丽,王慧,杨冬,胡元中.液体介质对解理云母粘着特性影响的实验研究[J].清华大学学报(自然科学版),2006(11):1836-1839. |
[6] | 杨冬,胡元中,王慧,张丽.解理云母表面粘着特性的实验[J].清华大学学报(自然科学版),2005(08):1076-1078. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%