利用铜模铸造法获得了直径为2 mm的Ti35Zr30Be27.5Cu7.5块体非晶合金.采用X射线衍射(XRD)、扫描电镜(SEM)、差氏扫描量热仪(DSC)及压缩试验等方法研究了非晶合金的相结构、显微组织和热稳定性,以及热处理对其压缩强度及塑性的影响.结果表明:在553和583 K温度下分别保温5 h后,实验合金仍保持为非晶态;在613 K保温1 h后,有晶化相出现.Tj35Zr30Be27.5Cu7.5非晶合金在583 K下保温1 h后其塑性变形量达到了6.57%,较热处理前提高了1倍,且保持了热处理前的强度,屈服强度和抗压强度分别为1921 MPa,2169 MPa.随着热处理温度的提高,非晶相含量减少,合金断裂强度、塑性变形量随之降低;同时合金断裂方式由韧性断裂转变为脆性断裂.
参考文献
| [1] | Peker A;Johnson W L .A highly processable metallic glass:Zr41.2Ti13.8Ni10Cu12.5Be22.5[J].Applied Physics Letters,1993,63(17):2342-2344. |
| [2] | Hays CC.;Johnson WL.;Kim CP. .Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions[J].Physical review letters,2000(13):2901-2904. |
| [3] | R.Vaidyanathan;M.Dao;G.Ravichandran .STUDY OF MECHANICAL DEFORMATION IN BULK METALLIC GLASS THROUGH INSTRUMENTED INDENTATION[J].Acta materialia,2001(18):3781-3789. |
| [4] | M.L. MORRISON;R.A. BUCHANAN;A. PEKER .Cyclic-anodic-polarization studies of a Zr_(41.2)Ti_(13.8)Ni_(10)Cu_(12.5)Be_(22.5) bulk metallic glass[J].Intermetallics,2004(10/11):1177-1181. |
| [5] | Xing L Q;Bertrand C;Dallas J P et al.Deformation behavior of partially crystallized Zr57Ti5AI10Cu20Ni8 bulk amorphous alloy[J].Materials Letters,1998,34(1-2):90-94. |
| [6] | Inoue A;Fan c;Saida J et al.High-strength Zr-bazed bulk amorphous alloys containing nanocrystalline and nanoquasicryatalline particles[J].Science Technology Advanced Material,2000,1(02):73-86. |
| [7] | Sakamoto H;Yamada T;Okumura N et al.Improvement in brittleness of amorphous Fe-S-B-C alloy ribbons by controlling casting conditions[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1996,206(01):150-153. |
| [8] | F.X. Qin;X.M. Wang;A. Inoue .Effect of annealing on microstructure and mechanical property of a Ti-Zr-Cu-Pd bulk metallic glass[J].Intermetallics,2007(10):1337-1342. |
| [9] | 杨元政,李喜峰,仇在宏,赵德强,谢致薇,匡同春,白晓军.Zr-基块体非晶合金近玻璃转变温度热处理后的组织与性能[J].金属热处理,2005(03):17-20. |
| [10] | 杨元政,赵德强,仇在宏,陈小祝,谢致薇,匡同春,白晓军.Fe60Co8Zr10Mo5W2B15块体非晶合金的形成及热处理对性能的影响研究[J].功能材料,2005(11):1682-1684. |
| [11] | 袁广银,尹健,丁文江.Mg-Cu-Ni-Gd非晶合金结构弛豫及力学性能[J].金属学报,2008(02):222-226. |
| [12] | Katharine M. Flores;Reinhold H. Dauskardt .Local heating associated with crack tip plasticity in Zr-Ti-Ni-Cu-Be bulk amorphous metals[J].Journal of Materials Research,1999(3):638-643. |
| [13] | C. J Gilbert;J. W. Ager lll;V. Schroeder;R. O. Ritchie;J. P. Lloyd;J. R. Graham .Light emission during fracure of a Zr-Ti-Ni-Cu-Be bulk metallic glass[J].Applied physics letters,1999(25):3809-3811. |
| [14] | Wright W J;Schwarz R B;Nix W D .Localized heating during serrated plastic flow in bulk metallic glasses[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2001,319-321(12):229-232. |
| [15] | Van den Beukel A;Sietsma J .The glass transition as a free volume related kinetic phenomenon[J].Acta Metallurgica Et Materialia,1990,38(03):383-389. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%