描述了与动能穿甲弹侵彻过程相关的钢板材料因素和力学性能,分析了硬度、洁净度、均匀性和组织对装甲钢板抗弹行为的影响.认为硬度对抗弹性能影响最显著,并且只有达到强韧性的最佳配合,装甲钢才能具有最优的抗弹性能.
参考文献
| [1] | Marvin Backmank E;Werner Goldsmith .The Mechanics of Penetration of Projectiles Into Targets[J].International Journal of Engineering Science,1978,16(01):1. |
| [2] | 蒋志刚,曾首义,周建平.分析金属靶板弹道极限的延性扩孔模型[J].弹道学报,2004(01):54-59. |
| [3] | Luk V K;Forrestal M J;Amos D E .Dynamics Spherical Cavity Expansion of Strain-Hardening Materials[J].Journal of Applied Mechanics,Transactions of the ASME,1991,58:1. |
| [4] | Woodward R L .The Interrelation of Failure Modes Observed in the Penetration of Metallic Targets[J].International Journal of Impact Engineering,1984,2(02):121. |
| [5] | Crouch I G .Metallic Armour-From Cast Aluminum Alloys to High-Strength Steels[J].Materials Forum,1988,12:31. |
| [6] | Lach E;Koerber G;Scharf M et al.Comparison of Nitrogen Alloyed Austenitic Steels and High Strength Armor Steels Impacted at High Velocity[J].International Journal of Impact Engineering,1999,23:509. |
| [7] | 董瀚;李桂芬;陈南平 .高强度装甲钢的抗弹性能研究[J].钢铁,1996,31(zk):67. |
| [8] | Manganello S J;Abbott K H .Metallurgical Factors Affecting the Ballistic Behavior of Steel Targets[J].Journal of Materials JMLSA,1972,7(02):231. |
| [9] | Dikshit S N;Kutumbarao V V;Sundararajan G .The Influence of Plate Hardness on the Ballistic Penetration of Thick Steel Plates[J].International Journal of Impact Engineering,1995,16(02):293. |
| [10] | 董瀚;李桂芬;陈南平 .回火温度对装甲钢性能的影响[J].金属热处理学报,1996,17(02):32. |
| [11] | Speich G R;Spitzig W A .Effect of Volume Fraction and Shape of Sulfide Inclusions on Through-Thickness Ductility and Impact Energy of High-Strength 4340 Plate Steels[J].Metallurgical and Materials Transactions,1982,13A:2239. |
| [12] | Biswas D K;Venkatraman M;Narendranath C S et al.Influence of Sulfide Inclusion on Ductility and Fracture Behavior of Resulfurized HY-80 Steel[J].Metallurgical and Materials Transactions,1992,23A:1479. |
| [13] | Sangoy L;Meunier Y;Pont G .Steels for Ballistic Protection[J].ISRAEL JOURNAL OF TECHNOLOGY,1988,24:319. |
| [14] | Ikkurthi V R;Chaturvedi S .Use of Different Damage Models for Simulating Impact-Driven Spallation in Metal Plates[J].International Journal of Impact Engineering,2004,30:275. |
| [15] | Corbett G G;Reid S R;Johnson W .Impact Loading of Plates and Shells by Free-Flying Projectiles:a Review[J].International Journal of Impact Engineering,1996,18(02):141. |
| [16] | Rawson J D W;Dawson D I.Ingot Casting by Electroslag Remelting[A].Portsmouth:Chestnut Hill,1972:273. |
| [17] | Joseph Prifti;Michael Castro;Richard Squillacioti et al.Improved Rolled Homogeneous Armor (IRHA) Steel Through Higher Hardness[R].Adelphi:US Army Reaeach Laboratory,1997. |
| [18] | Beatty John H;Morris Azin.Correlation ol Ballistic Performance to Shear Instability Studies in High Strength Steals[A].Orlando:Army Science Board Washington DC,1992:51. |
| [19] | Narasimha B V;Thomas G .Structure-Property Relations and Design of Fe-4Cr-C Base Structure Steels for High Strength and Toughness[J].Metallurgical and Materials Transactions,1980,11A:441. |
| [20] | George KRAUSS .Heat treated martensitic steels: microstructural systems for advanced manufacture[J].ISIJ International,1995(4):349-359. |
| [21] | Sastry C N;Padmanabhan R;Dilipkumar D.Achieving Optimum Properties in Ultrahigh-Strength Low-Alloy Steel[J].Metals and Technology,1981(12):454. |
| [22] | Yoshiyuki Tomita;Kunio Okabayashi .Mechanical Properties of 0.4 Pet C-Ni-Cr-Mo High Strength Steel Having a Mixed Structure of Matensite and Bainite[J].Metallurgical and Materials Transactions,1985,16A:73. |
| [23] | Tomita Y .Effect of Martensite Morphology on Mechanical Properties of Low Alloy Steels Having Mixed Structure of Martensite and Lower Beinite[J].Journal of Materials Science and Technology,1991,7:299. |
| [24] | Yoshiyuki Tomita .Effect of Microstructure on Plane-Strain Fracture Toughness of AISI 4340 Steel[J].Metallurgical and Materials Transactions,1988,19A:2513. |
| [25] | Yoshiyuki Tomita .Improved Lower Temperature Fracture Toughness of Ultrahigh Strength 4340 Steel Through Modified Heat Treatment[J].Metallurgical and Materials Transactions,1987,18A:1495. |
| [26] | Tomita Y .Mechanical Properties of Modified Heat Treated Silicon Modified 4330 Steel[J].Journal of Materials Science and Technology,1995,11:259. |
| [27] | Tomita Y .Effect of Modified Heat Treatment on Mechanical Properties of 300M Steel[J].Journal of Materials Science and Technology,1995,11:245. |
| [28] | Chang-Sun LEE;Wung-Yong CHOO .Effects of Austenite Conditioning and Hardenability on Mechanical Properties of B-Containing High Strength Steels[J].ISIJ International,2000(Suppl.):189-193. |
| [29] | Guen Chul Hwang;Sunghak Lee;Jang Yong Yoo .Effect of Direct Quenching on Mierostructure and Mechanical Properties of Copper-Bearing High-Strength Alloy Steels[J].Materials Science and Engineering,1998,252A:256. |
| [30] | Wickman H A;Ayvazian A M;Hickey C F.Evaluation of an Army Steel Produced by the AC/DQ Process[A].Chicago:TMS,1992:423. |
| [31] | Herman W A;Foos M.Weldability and Mechanical Property Evaluation of Armor Quality AC/DQ Low Carbon Steels[A].Pittsburgh:TMS,1993:515. |
| [32] | Manganello S J;Wilson A D.Direct Quenching and Its' Effects on High-Strength Amour Plate[A].Pittsburgh:TMS,1993:235. |
| [33] | 董瀚.直接淬火装甲钢的微观组织和性能[J].材料开发与应用,1996(05):17. |
| [34] | Speich G R;Hu H;Miller R L .Effect of Preferred Orientation and Related Metallurgical Parameters on Mechanical and Ballistic Performance of High-Hardness Steel Armor[R].Monroeville:United States Steel Corporation,1974. |
| [35] | 张俊粉,时捷,施哲,陈蓉.组织细化对中碳Cr-Mo钢力学性能的影响[J].钢铁,2006(08):55-59. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%