结合南京钢铁股份有限公司电炉厂方坯连铸机的生产实际,用数学模型初步计算凝固末端的坯壳厚度,利用射钉结果对数学模型进行修正,通过一定拉速下、一定钢种的温度场的计算,找出液芯为35～55 mm的位置,确定将末端电磁搅拌器安装在距弯月面8 m处.并利用特斯拉计现场测试二冷末端电磁搅拌器的磁感应强度,确定电流为550 A,频率为13 Hz时的参数为最佳搅拌参数.同时对一定条件下的铸坯进行了化学成分化验,结果表明经过末端电磁搅拌的连铸坯试样中心碳和硫的偏析程度与未经过末端电磁搅拌的试样相比有不同程度的减轻,冶金效果比较理想.
参考文献
| [1] | Nakada M.;Nishioka S.;Tsutsumi K.;Murakami H.;Tsuchida Y.;Mori K. .REDUCTION OF MACROSEGREGATION BY APPLYING A DC MAGNETIC FIELD AT THE FINAL STAGE OF SOLIDIFICATION[J].ISIJ International,1997(4):358-364. |
| [2] | El-Kaddah N.Effect of Stirrer Design on Mixing in Horizontal Electromagnetic Stirring of Steel Slabs[A].,1999:6-8. |
| [3] | Kollberg S.Contribution to the Theory and Experience of Electromagnetic Stirring in Continuous Casting[J].Iron and Steel Engineer,1980(03):46-54. |
| [4] | Flemings M C .Behavior of Metal Alloys in the Semisolid State[J].Metallurgical Transactions A,1991,22(04):957-981. |
| [5] | Kirkwood D H .Semisolid Metal Processing[J].International Materials Reviews,1994,39(05):173-180. |
| [6] | Dubke M .Flow Fields in Electromagnetic Stirring of Rectangular Strands With Linear Inductors Theory and Experiments With Cold Models[J].Metallurgical Transactions B,1988,19:581-593. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%