论述了微动疲劳的概念及时其研究的必要性.对微动疲劳研究的4个主要部分即微动疲劳的机理研究、影响因素、寿命预测和防护方法的发展过程进行了论述,尤其对当前的研究现状及所取得的成果做了重点阐述,并说明了一些尚待研究的问题.从微动疲劳机理研究、研究方法和防护方法等几个方面概述了微动疲劳研究的发展趋势.
参考文献
[1] | 何明鉴.机械构件的微动疲劳[M].北京:国防工业出版社,1994 |
[2] | Dubourg;Marie-Christine .Local fretting regime influences on crack initiation and early growth[J].ASTM Special Technical Publication,2002,n1425:206. |
[3] | Ding J;Madge J;Leen S B.Towards the modelling of fretting wear and fatigue interaction in spline couplings[A].,2006:5-6:165. |
[4] | 张德坤,葛世荣.钢丝的微动磨损及其对疲劳断裂行为的影响研究[J].摩擦学学报,2004(04):355-359. |
[5] | M. Helmi Attia .Fretting fatigue and wear damage of structural components in nuclear power stations-Fitness for service and life management perspective[J].Tribology International,2006(10):1294-1304. |
[6] | Huang Weijiu;Hou Bin;Pang Youxia et al.Fretting wear behavior of AZ91D and AM60B magnesium alloys[J].Wear,2006,260(11):1173. |
[7] | Warhadpande A;Leonard B;Sadeghi F .Effects of fretting wear on rolling eontact fatigue life of M50 bearing steel[J].Proceedings of the Institution of Mechanical Engineers Part J:J Eng Tribology,2008,222(02):69. |
[8] | XU Xiang-yang,HAN Jian-min,XU Bin-shi,LIU Shi-can,ZHOU Zhong-rong.Fatigue Delamination Characteristics of Plasma Sprayed Coatings under Fretting[J].材料热处理学报,2004(05):960-963. |
[9] | 刘伟,何庆复,张云.微动损伤对车轴疲劳寿命的影响[J].铁道学报,1998(06):115. |
[10] | Collins J A;Tovey F M .J mater,fretting fatigue mechanisms and the effect of direction of fretting motion on fatigue strength[J].J Materl (Changed to J Testing & Evaluation),1972,7:460. |
[11] | Hamdy M M;Waterhouse R B .The fretting fatigue behavior of Ti6Al4V at temperature up onto 600℃[J].Wear,1979,56:1. |
[12] | Nishioka K;Hirakawa K .[J].Bulletin of the JSME,1969,12(52):693. |
[13] | Vincent L;Berthier Y;Dubourg M C .Mechanics and materials in fretting[J].Wear,1992,153:135. |
[14] | Faycull S;Blanchard P;Vincent L .Fretting behaviour of titanium alloys[J].Tribilogy Trans,1993,36:267. |
[15] | Faycull S;Kepsa P H;Vincent L .Theoretical analysis of fatigue cracking under dry friction for fretting loading conditions[J].Wear,1996,193:25. |
[16] | Oroudhom H;Fouvry S;Yantio G R .Determination and prediction of the fretting crack initiation,introduction of the (P,Q,N) representation and definition of a variable process volume[J].International Journal of Fatigue,2006,28:707. |
[17] | Nix K J;Lindley T C .Fatigue fract[J].Eng Mater Strut,1985,8(02):1435. |
[18] | Bill R C .Review of factors that influence fretting wear[J].ASTM Stp,1982,780:165. |
[19] | Waterhouse P B .Friction,lubrication,and wear,technology[J].The Materials Information Society,1992,18:242. |
[20] | Berthier Y;Colombie Ch;Vincent L .Fretting wear and their effects on fretting fatigue[J].Journal of Tribology,1988,110:517. |
[21] | Dobromirski J M .Variables of fretting process[J].ASTM Stp,1992,1159:60. |
[22] | Iyer K;Mall S .Analysis of contact pressure and stress amplitude effectson fretting fatigue life[J].ASME J Eng Mater Techn,2001,123:8593. |
[23] | Jin O;Mall S .Effects of slip on fretting behavior:Experiments and analyses[J].Wear,2004,256:671. |
[24] | Zhou Z R;Vincent L .Mixed fretting regime[J].Wear,1995,181-183:531. |
[25] | Vingbo O B.Fretting and contact fatigue studied with the aid of fretting maps[A].,1992:49. |
[26] | Nishioka K;Hirakawa K .Fundamented investigations of fretting fatigue[J].JSME International Journal,1969,12:692. |
[27] | Sato K .Damage formation during fretting fatigue[J].Wear,1988,125:163. |
[28] | Ruiz C;Boddington P H B;Chen C .An investigation of fatigue dovetail joint[J].Experimental Mechanics,1984,24:208. |
[29] | 朱如鹏;潘升材;高德平 .微动疲劳中的应力状态参数和微动磨损参数的研究[J].工程力学,1998,15(04):116. |
[30] | 王春明 .高周、低周及高低周复合载荷作用下微动损伤的试验研究[D].南京:南京航空学院,1989. |
[31] | Mutoh Y;Xu J Q .Fracture mechanics approach to fretting and problem to besolved[J].Tribology Int J,2003,36:99. |
[32] | Golden P J;Grand A F .Fracture mechanics based fretting fatigue life predictionsin Ti-6Al-4V[J].Engineering Fracture Mechanics,2004,71:2229. |
[33] | Naboulsi S .Applications of crack analogy to fretting fatigue[J].Engineering Fracture Mechanics,2005,72:1610. |
[34] | Golden P J;Calcaterra J R .A fracture mechanics life prediction methodology applied to dovetail fretting[J].Tribology International,2006,1:1. |
[35] | Jin O;Lee H .Investigation into cumulative damage rules to predict fretting fatigue life of Ti-6Al-4V under two-level block loading condition[J].ASME Journal of Engineering Materials and Technology,2003,125:315. |
[36] | Cortez B;Hankar M;Jeffrey R .Investigation of variable amplitude loading onfretting fatigue behavior of Ti-6Al-4V[J].International Journal of Fatigue,1999,21:709. |
[37] | Coffin L F .A study of the effects of cycle thermal stresses on a ductilemetal[J].Transactions of the ASME,1954,76:931. |
[38] | Basquin O .The exponential law of endurance test[J].Am Soc Test Master Proc,1970,10:625. |
[39] | Smith K N;Watson P;Topper H .A stress function for the fatigue of metals[J].J Mat JMLSA,1970,15:767. |
[40] | Patrick J. Golden;Alisha Hutson;Vasan Sundaram .Effect of surface treatments on fretting fatigue of Ti-6Al-4V[J].International Journal of Fatigue,2007(7):1302-1310. |
[41] | Aravind Vadiraj;M. Kamaraj .Effect of surface treatments on fretting fatigue damage of biomedical titanium alloys[J].Tribology International,2007(1):82-88. |
[42] | I. Caron;J. M. De Monicault;R. Gras .Influence of surface-coatings on titanium-alloy resistance to fretting fatigue in cryogenic environment[J].Tribology International,2001(4):217-223. |
[43] | Golden Patrick J;Shepard Michael J .Life prediction of fretting fatigue with advanced surface treatments[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2007,470:5. |
[44] | Ganesh Sundara Raman S;Jayaprakash M .[J].Influence of plasma nitriding on plain fatigue and fretting fatigue behaviour of AISI 304 austenitic stainless steel Surf Coat Techn,2007,201(12):5906. |
[45] | Kubiak K;Fouvry S;Wendler B G .Comparison of shot peening and nitriding surface treatments under complex fretting loadings[J].Materials Science Forum,2006,513:105. |
[46] | M. Liao;W. R. Chen;N. C. Bellinger .Effects of ultrasonic impact treatment on fatigue behavior of naturally exfoliated aluminum alloys[J].International Journal of Fatigue,2008(4):717-726. |
[47] | Hutson A L;Niinomi A L M;Nicholas T et al.Effect of various surface conditions on fretting fatigue behavior of Ti6Al-4V[J].International Journal of Fatigue,2002,24:1223. |
[48] | Mohrbacher Hardy;Blanpain Bart;Celis Jean-Pierre .Friction and wear mechanisms on CVD diamond and PVD TiN coatings under fretting conditions[J].ASTM Special Technical Publication,1996,1278:76. |
[49] | Jin O;Mall S;Sanders JH;Sharma SK .Durability of Cu-Al coating on Ti-6Al-4V substrate under fretting fatigue[J].Surface & Coatings Technology,2006(3/4):1704-1710. |
[50] | Sato J .Fretting wear of stainless steel[J].Wear,1981,69(12):167. |
[51] | Antler N .Fretting of electrical contacts,an investigation of palladium rnatel to other materials[J].Wear,1982,81(01):159. |
[52] | Higham P A et al.Influence of polymer composition on the wear of the metal surface during fretting of steel on polymer[J].Wear,1978,47:71. |
[53] | 徐灏.疲劳强度设计[M].北京:机械工业出版社,1981 |
[54] | 王珉.抗疲劳制造原理与技术[M].南京:江苏科学技术出版社,1999 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%