对TC21钛合金在880~950℃进行固溶,研究了固溶温度对TC21钛合金的微观组织的影响规律.采用OM、TEM及EBSD取向分析方法,研究了热处理温度对TC21钛合金中形成块状α相的影响规律.结果表明,在880℃、900℃观察到了块状α相,在930℃、950℃没有观察到块状α相.EBSD取向分析表明,大块α相与其临近β相之间满足Burgers取向关系.显微硬度在900℃固溶后达最小值,温度高于900℃时,显微硬度增加.
参考文献
[1] | Boyer R R .An overview on the use of titanium in the aerospace industry[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1996,213:103-114. |
[2] | Makoto Yamada .An overview on the development of titanium alloys for non-aerospace application in Japan[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1996,213:8-15. |
[3] | 赵永庆,曲恒磊,冯亮,杨海瑛,李辉,张颖楠,郭红超,黄定坤.高强高韧损伤容限型钛合金TC21研制[J].钛工业进展,2004(01):22-24. |
[4] | 冯亮,曲恒磊,赵永庆,李辉,张颖楠,曾卫东.TC21合金的高温变形行为[J].航空材料学报,2004(04):11-13. |
[5] | Bougrarit D;Quesne C;Baudin T.Titanium'95:Science and Technology[M].Birmingham,1996:917. |
[6] | 朱知寿,王新南,童路,刘东升.新型TC21钛合金相变行为和相组成研究[J].稀有金属快报,2006(12):23-27. |
[7] | Yuhuan Fei;Lian Zhou;Henglei Qu;Yongqing Zhao;Chuanzhen Huang .The phase and microstructure of TC21 alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):166-172. |
[8] | YiHong Wang;Hongchao Kou;Hui Chang;ZhiShou Zhu;FengShou Zhang;Jinshan Li;Lian Zhou .Influence of solution temperature on phase transformation of TC21 alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2009(1/2):76-82. |
[9] | 黄孝瑛.透射电子显微学[M].上海:上海科学工业出版社,1987 |
[10] | Burgers W G .On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium[J].Physica,1934,1:561-586. |
[11] | Bhattaeharyya D;Viswanathan G B;Denkenberger R et al.The role of crystallographic and geometrical relationships between a and h phases in an a/b titanium alloy[J].Acta Materialia,2003,51:4679-4691. |
[12] | 布鲁格斯CR;丁夫.有色合金的热处理组织与性能[M].北京:冶金工业出版社,1988 |
[13] | 张喜燕;赵永庆;白晨光.钛合金及其应用[M].北京:化学工业出版社,2005 |
[14] | 张颖楠,赵永庆,曲恒磊,李辉,冯亮,郭红超,黄定坤.热处理对TC21合金显微组织和室温拉伸性能的影响[J].稀有金属,2004(01):34-38. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%