Repair welding of cold-work tool steels in cold is very risky and almost impossible by conventional processes. The application of pulse shaping in laser cladding with wire to avoid the solidification problems in relevant steel is demonstrated. The results show that sound remelting and/or cladding can be achieved by the right selection of laser parameters and pulse shape, i.e. long pulse duration, moderate pulse peak powers and ramped-down pulse shape. Despite the defects and softening in the cladding due to the formation of retained austenite, the cladding shows better wear resistance at lower loads compared to the heat-treated base material.
参考文献
| [1] | E. Capello;D. Colombo;B. Previtali .Repairing of sintered tools using laser cladding by wire[J].Journal of Materials Processing Technology,2005(0):990-1000. |
| [2] | F. Malek Ghaini;M.J. Hamedi;M.J. Torkamany .Weld metal microstructural characteristics in pulsed Nd: YAG laser welding[J].Scripta materialia,2007(11):955-958. |
| [3] | J.X. Zou;T. Grosdidier;K.M. Zhang .Microstructures and phase formations in the surface layer of an AISI D2 steel treated with pulsed electron beam[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2007(0):707-709. |
| [4] | J.X. ZOU;T. GROSDIDIER;B. BOLLE .Texture and Microstructure at the Surface of an AISI D2 Steel Treated by High Current Pulsed Electron Beam[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2007(9):2061-2071. |
| [5] | R. Colaco;R. War .On the influence of retained austenite in the abrasive wear behaviour of a laser surface melted tool steel[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2005(1/4):225-231. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%