采用喷射成形技术制备了不同Zn含量的7×××系超高强铝合金,研究了Zn含量对材料的显微组织及室温力学性能的影响.结果表明:喷射成形工艺可显著细化晶粒,有效抑制合金内的偏析,获得细小、均匀的等轴晶组织,采用相同工艺制备的不同Zn含量的材料的晶粒尺寸为10～20μm.喷射成形制备的7×××系超高强铝合金中的主要组成相为:α(Al)、六方晶格的MgZn2、四方晶格的Al2Cu和面心斜方晶格的Al2CuMg.Zn含量在9.5%～11.5%时,经过适当的热处理,材料的强度可以达到800 MPa以上.综合考虑材料的组织和性能,确定喷射成形7×××系铝合金中的Zn含量应控制在9.5%～11.5%.
参考文献
| [1] | Hirsch J;Karhausen K F;Lochte L .Advances in industrial aluminum research and development[J].Materials Science Forum,2002,396-402:1721-1730. |
| [2] | Lukasak D A;Hart R M .Strong aluminum alloy shave airframe weight[J].Current Advances in Materials and Processes,1991,10:46-51. |
| [3] | Fridlyander I N .Russian aluminum alloys for aerospace and transport applications[J].Materials Science Forum,2000,331-337:921-925. |
| [4] | Jurg Zehnder .Aluminium in the Rail Transportation Market[J].Materials Science Forum,2002(Pt.1):3-8. |
| [5] | Gao M;Feng C R;Wei R P .An analytical electron microscopy study of constituent particle in commercial 7075-T6 and 2024-T3 alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1998,29:1145-1152. |
| [6] | Song RG;Dietzel W;Zhang BJ;Liu WJ;Tseng MK;Atrens A .Stress corrosion cracking and hydrogen embrittlement of an Al-Zn-Mg-Cu alloy[J].Acta materialia,2004(16):4727-4743. |
| [7] | Adrien J;Maize E;Esterez R et al.Influence of the thermomechanical treatment on the microplastic behaviour of a wrought AlZnMgCu alloys[J].Acta Materialia,2004,52:1653-1661. |
| [8] | N.Q. Chinh;J. Lendvai;D.H. Ping .The effect of Cu on mechanical and precipitation properties of Al-Zn-Mg alloys[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2004(1/2):52-60. |
| [9] | Lengsfeld P;Juarez J A;Lavernia E J et al.Microstructure and mechanical behavior of spray deposited Zn modified 7××× Al alloys[J].International Journal of Rapid Solidification,1995,8:237-265. |
| [10] | 韦强,熊柏青,张永安,朱宝宏,石力开,ZHU Bao-hong,SHI Li-kai.Production of high strength Al-Zn-Mg-Cu alloys |
| [11] | Sanctics M De .Structure and properties of rapidly solidified ultrahigh strength Al-Zn-Mg-Cu alloys produced by spray deposition[J].材料科学与工程学报,1991,141:103-121. |
| [12] | Salamci E .Directionality in the mechanical properties of spray cast and extruded 7××× series aluminum alloys[J].Turkish Journal of Engineering and Environmental Sciences,2003,27:169-176. |
| [13] | Duan X M;Hao Y Y;Grant NJ et al.Liquid dynamic compaction of aluminum alloy 7150[J].International Journal of Powder Metallurgy,1993,29(02):149-159. |
| [14] | 张永安;熊柏青;石力开 等.喷射成型过程中雾化粒滴的数值模拟[J].中国有色金属学报,1999,9(z1):78-83. |
| [15] | 张永安,熊柏青,刘红伟,朱宝宏,石力开,张济山,夏茅栗.CuCr25触头材料的喷射成形制备及其组织分析[J].中国有色金属学报,2003(05):1067-1070. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%