欢迎登录材料期刊网

材料期刊网

高级检索

The effect of thermomechanical control processing(TMCP)on microstructure and mechanical properties of Fe-0.2C-1.44Si-1.32Mn hot rolled TRIP steel was investigated through experiments.Strain-induced transformation and transformation-induced plasticity behavior of retained austenite were analyzed.The results show that with multipass deformation,reduction per pass of more than critical deformation in austenite recrystallization region and total reduction of more than 58% in non-recrystallization region and high temperature section of two-phase region,austenite can be refined before γ→α transformation.It is beneficial to obtain refined ferrite grain in final microstructure.To obtain fine and uniform microstructure and excellent strength-ductility balance,a three-stage cooling process(laminar cooling-air cooling-ultra-fast cooling)after hot rolling was conducted.The ultimate tensile strength and elongation of the investigated steel can reach 663 MPa and 41%,respectively.

参考文献

[1] P. J. JACQUES;J. LADRIERE;F. DELANNAY .On the Influence of Interactions between Phases on the Mechanical Stability of Retained Austenite in Transformation-Induced Plasticity Multiphase Steels[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2001(11):2759-2768.
[2] 余海燕,林忠钦,李淑慧,陈关龙.TRIP钢板在单向拉伸变形下的相变行为研究[J].材料科学与工艺,2004(04):433-435.
[3] Girault E;Jacques P;Harlet Ph et al.Metallographic Methods for Revealing the Muhiphase Microstructure of TRIP-Assisted Steels[J].Materials Characterization,1998,40(02):111.
[4] 邹宏辉,符仁钰,李麟,朱晓东.低碳Si-Mn系TRIP钢的热处理工艺对组织的影响[J].金属热处理,2003(01):59-62.
[5] Sakuma Y;Matsumura O;Takechi H .Mechanical Properties and Retained Austenite in Intercritically Heat-Treated BainiteTransformed Steel and Their Variation With Si and Mn Additions[J].Metallurgical and Materials Transactions,1991,22A(02):489.
[6] Lee Chang Gil;Kim Sung-Joon;Lee Tae-Ho et al.Effect of Tramp Elements on Formability of Low-Carbon TRIP-Aided Multiphase Cold-Rolled Steel Sheets[J].ISIJ International,2004,44(04):737.
[7] P. JACQUES;Q. FURNEMONT;T. PARDOEN .ON THE ROLE OF MARTENSITIC TRANSFORMATION ON DAMAGE AND CRACKING RESISTANCE IN TRIP-ASSISTED MULTIPHASE STEELS[J].Acta materialia,2001(1):139-152.
[8] Y.Chen,X.Chen,Z.X.Yuan,B.F.Xu,A.M.Guo,P.H.Li,S.K.Pu.EFFECTS OF CARBON CONTENT AND ROLLING PROCESSING ON RETAINED AUSTENITE FOR HOT-ROLLED TRIP STEELS[J].金属学报(英文版),2002(05):439-447.
[9] Hanzaki A Z;Hodgson P D;Yue S .Hot Deformation Characteristics of Si-Mn TRIP Steels With and Without Microalloy Additions[J].ISIJ International,1995,35(03):324.
[10] WANG Xu;HUA Li-xian;WANG Si-gen.Study on Heat Treatment Process of Transformation Induced Plasticity(TRIP)Steel[J].Heat Treatment of Metals,1995(06):14.
[11] Matsuda Hiroshi;Kitano Fusato;Hasegawa Kohei .Metallurgy of continuously annealed high strength TRIP steel sheet[J].Steel Research,2002(6/7):211-217.
[12] WANG You-ming;LI Man-yun;WEI Guang.Controlled Rolling and Controlled Cooling for Metal[M].Beijing:of Metallurgical Industry Press,1995
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%