The effects of the mold preheating and the silicon content of ductile iron on the percentage of carbides,graphite nodule counts and shrinkage volume were investigated. The results showed that the percentage of carbides and the shrinkage volume decreased when the mold preheating increased. The ductile iron with the carbon equivalent of 4.45 % and the silicon content of 2. 5% without any porosity defects was achieved when the mold preheating was 450 ℃. Increasing the silicon content in the range of 2.1%-3.3 % led to the increase in graphite nodule count and graphite size and the decrease in percentage of carbides. It is due to the increase in induced expansion pressure during the graphite formation with the increasing of silicon content. The suitable condition for casting a sound product of ductile iron without the riser at the mold preheating temperature of 300 ℃ is the silicon content of 3.3 % and carbon equivalent of 4. 7 %.
参考文献
| [1] | Murat Baydogan,Seckin Izzet Akray.Successive Boronizing and Austempering for GGG-40 Grade Ductile Iron[J].钢铁研究学报（英文版）,2009(02):50-54. |
| [2] | Santis A D;Bartolomeo O D;Iacoviello D et al.Quantitative Shape Evaluation of Graphite Particles in Ductile Iron[J].Journal of Materials Processing Technology,2008,196(1/2/3):292. |
| [3] | Pedersen K M;Tiedje N S .Graphite Nodule Count and Size Distribution in Thin-Walled Ductile Iron[J].Materials Characterization,2008,59(08):1111. |
| [4] | Nilsson K F;Blagoeva D;Moretto P .An Experimental and Numerical Analysis to Correlate Variation in Ductility to Defects and Microstructure in Ductile Iron Components[J].Engineering Fracture Mechanics,2006,73(09):1133. |
| [5] | Yang J;Putatunda S K .Improvement in Strength and Toughness of Austempered Ductile Cast Iron by a Novel Two-Step Austempering Process[J].Materials & Design,2004,25(03):219. |
| [6] | Nilsson, KF;Vokal, V .Analysis of ductile cast iron tensile tests to relate ductility variation to casting defects and material microstructure[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2009(1/2):54-63. |
| [7] | Kállbom R;Hamberg K;Wessén M et al.On the Solidification Sequence of Ductile Cast Irons Containing Chunky Graphite[J].Materials Science and Engineering,2005,413-414A:346. |
| [8] | Vijayaram T R;Sulaiman S;Hamouda A M S et al.Numerical Simulation of Casting Solidification in Permanent Metallic Molds[J].Journal of Materials Processing Technology,2006,178(1/2/3):29. |
| [9] | Godsell B C .Producing As-Cast Ductile Iron in Iron Permanent Molds[J].Modern Casting,1982,72(07):35. |
| [10] | Stefanescu D M.Cast Iron,Metals Handbook[M].Oh:ASM,1988 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%