首次采用正交试验法研究了烧结工艺中工艺参数对ZnO压敏陶瓷性能的影响.经试验研究,最终确定出了烧结工艺中的主要工艺参数,即烧结温度、保温时间、升温速率、烧结方式的最佳配比,为工业生产ZnO压敏陶瓷提供了理论与试验上的技术依据.
参考文献
| [1] | 陈志清;谢恒堃.氧化锌压敏瓷及其在电力系统中的应用[M].北京:水利电力出版社,1992 |
| [2] | 傅静,徐政.ZnO压敏电阻器的性能及发展[J].现代技术陶瓷,2004(01):31-36. |
| [3] | Metz R.;Vignalou JR.;Achard N.;Elkhatib M.;Delalu H. .Electrical properties of varistors in relation to their true bismuth composition after sintering[J].Materials Chemistry and Physics,2000(2):157-162. |
| [4] | Gupta T K .Application of zinc oxide varistors[J].Journal of the American Ceramic Society,1990,73(07):1817. |
| [5] | Hong J .Sintering and varistor characteristics of ZnO-Bi2O3 ceramics[J].Journal of Applied Physics,1980,51(08):4453. |
| [6] | 严群,唐俊,陈家钊,涂铭旌.氧化锌压敏电阻片电位梯度参数优化的实验研究[J].电瓷避雷器,2003(01):36-39. |
| [7] | Senda T;Bradt R C .Grain growth of zinc oxide during the sintering of zinc oxide-antimony oxide ceramics[J].Journal of the American Ceramic Society,1991,74:1296. |
| [8] | 康雪雅;庄顺昌 .烧结温度对低压ZnO压敏陶瓷显微结构及电性能的影响[J].硅酸盐学报,1994,22(02):202. |
| [9] | 丁柱平.氧化锌电阻片烧结温度、保温时间与其性能的关系[J].电瓷避雷器,1995(04):3. |
| [10] | 李盛涛;刘辅宜 .烧结过程对氧化锌压敏陶瓷晶核形成和生长过程的影响[J].无机材料学报,1996,11(03):476. |
| [11] | May-Ying Chu.Effect of heating rate on sintering and coarse phase of bismuth sesquioxide[J].Journal of Solid State Chemistry,1978(26):256. |
| [12] | Sida M;Chun S Y;Wakiya N et al.Effect of the sintering temperature and atmosphere on the grain growth and grain boundary phase formation of Pr-doped ZnO varistor[J].Journal of the Ceramic Society of Japan,1996,104(01):44. |
| [13] | 禹争光 .氧化锌压敏电阻电输运特性及大通流器件设计研究[D].电子科技大学,2005. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%