利用本钢Gleeble2000热/力模拟试验机结合本钢薄板坯连铸连轧生产线生产低碳含Nb钢X46的生产工艺，对不同Nb含量的低碳钢进行单道次压缩实验。考虑了钢中Mn和Nb的影响，回归了变形抗力模型。现场数据和热模拟实验结果表明：管线钢X46的再结晶终止温度为981.3 ℃。薄板坯连铸连轧粗轧阶段的动态软化率接近于1。考虑动态再结晶以及未再结晶区的应变累计，计算的变形抗力与现场实测的变形抗力吻合良好。表明该模型能够预测薄板坯连铸连轧生产线生产低碳含Nb钢的变形抗力。
Single pass reduction test of X46 steel produced by compact strip rolling line at Benxi Steel was performed by Gleeble2000 thermal/mechanical simulation tester. Considering the effect of Mn and Nb content, deformation resistance modeling was studied. Production data and single pass reduction test results show that and temperature of recrystallization for X46 steel is 981.3 ℃；Dynamic recrystallization fraction is close to 1 during rough rolling; Calculated deformation resistances are in good agreement with experimental results by considering the effect of dynamic recrystallization and accumulative strain,showing that the developed model can predict deformation resistance of low carbon Nb bearing steel in compact strip process.
参考文献
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%