欢迎登录材料期刊网

材料期刊网

高级检索

为了探索提高衬层型重载摩擦副用碳纤织物增强聚合物自润滑复合材料使用性能的途径,采用微观分析与力学性能检测等手段,研究了碳纤织物不同表面处理方法(空气氧化、浓硝酸氧化、偶联剂涂覆、气液双效和液相双效处理)对碳纤及其复合材料界面和性能的影响.结果表明,与未处理的碳纤相比,表面处理后的碳纤比表面积增大/表面活性官能团升高,复合材料层间剪切强度得到显著提高;采用偶联剂涂覆处理具有较佳的综合效果,所制备的复合材料弯曲强度达1088.9MPa,拉伸强度为538.1MPa,压缩强度为551.3MPa;冲击韧性为72.2 kJ/m2.断口形貌分析表明,碳纤表面处理后有利于胶体均匀分布包覆于碳纤周围,从而使材料性能得到提高.

参考文献

[1] 尹延国,姚巍,俞建卫,田明.环氧树脂粘接润滑涂层摩擦学特性[J].高分子材料科学与工程,2011(09):80-83,87.
[2] 张杰,宁荣昌,李红,齐大伟,凌辉.碳纤维增强环氧树脂基复合材料的性能研究[J].中国胶粘剂,2009(03):21-25.
[3] Thatiane Brocks;Maria Odila Hilario Cioffi;Herman Jacobus Cornelis Voorwald .Effect of fiber surface on flexural strength in carbon fabric reinforced epoxy composites[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2013(Jun.1):210-216.
[4] Doris W.Y. Wong;Lin Lin;P.Terry McGrail .Improved fracture toughness of carbon fibre/epoxy composite laminates using dissolvable thermoplastic fibres[J].Composites, Part A. Applied science and manufacturing,2010(6):759-767.
[5] 陈平,于祺,路春.纤维增强聚合物基复合材料的界面研究进展[J].纤维复合材料,2005(01):53-59.
[6] 王源升,朱珊珊,姚树人,周慧慧,石继梅.碳纤维表面改性及对其复合材料性能的影响[J].高分子材料科学与工程,2014(02):16-20.
[7] 季春晓,刘礼华,曹文娟.碳纤维表面处理方法的研究进展[J].石油化工技术与经济,2011(02):57-61.
[8] C. Marieta;E. Schulz;L. Irusta .Evaluation of fiber surface treatment and toughening of thermoset matrix on the interfacial behaviour of carbon fiber-reinforced cyanate matrix composites[J].Composites science and technology,2005(14):2189-2197.
[9] 彭公秋,杨进军,曹正华,谢富原.碳纤维增强树脂基复合材料的界面[J].材料导报,2011(07):1-4.
[10] K.H. Wong;D. Syed Mohammed;S.J. Pickering;R. Brooks .Effect of coupling agents on reinforcing potential of recycled carbon fibre for polypropylene composite[J].Composites science and technology,2012(7):835-844.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%