采用透射电子显微镜和光学显微镜观察高纯钛单晶及工业纯钛循环变形过程中形成的孪晶,证实了孪晶是纯钛循环变形的一种重要方式几乎在所有位向的拉伸时钛单晶中都有孪生发生。工业纯钛在应变幅低于1.0%下循环变形时孪晶的生成很少;在高应变幅高于1.5%,随循环变形周次的增加,孪晶分数增加,利用自动图像分析仪首次建立了工业纯钛中形变孪晶分数与应变幅、循环周次的定量关系。
In this paper,cyclic twins in high purity single titanium crystal and commerical purity titanium were observed with TEM and OM. It is showed that twinning was an important deformation mode.Twinning occured in single titanium crystal with almost all orien
参考文献
| [1] | TanXiaoli,GuHaicheng,ZhangShufen,C．Laird．MatSciEng,1994,A189:772谭晓礼,顾海澄．材料研究学报,1995,9(2):1033谭晓礼,顾海澄．材料研究学报,1996,10(2):254郭慧芳．钛单晶的疲劳行为,[硕士论文],西安交通大学,1989年5YooMH．MatallTrans,1981,12(6):4096PatonNE,BachonfenEA1970,(1):28397Reed—HillRE．DeformationTwinning．ProceedingsofaConferenceSponsoredbytheMetalSoc&Other,1964:2958HansenNetaled:DeformationofPolycrystalsMechanismsandMicstructure,InternationalSymposiumonMetallurgyandMaterialScience．2nd、RisoNationalLaboratory,1981:1779张哲峰．工业纯钛及TC11合金低周疲劳行为,[硕士论文],西安交通大学,1995年. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%