采用层片式扩散偶制备技术制备Al/Sn扩散偶,在不同热压温度条件下进行热处理,利用金相显微镜、扫描电镜、能谱仪、XRD衍射仪等研究Al/Sn扩散偶扩散溶解层的形貌特征与形成机理.结果表明:在0.5 MPa和230℃烧结条件下,Sn元素优先沿Al晶界扩散,然后沿其表面扩散;随着扩散时间的延长,Al与Sn元素间扩散和溶解程度增大,界面区无新物相生成,最终形成由Al和Sn的离异合金组织组成的界面过渡层且呈锯齿状形态分布;Al/Sn界面冶金结合是Al和Sn固相扩散、溶解与结晶共同作用的结果.
@@@@The diffusion couples of Al/Sn were prepared by laminating diffusion couple technology, and then treated for different holding times. The appearance characteristics and forming mechanism of Al/Sn diffusion solution layer were investigated by the metallographic microscope, SEM, EDS and X-ray diffractometry. The results show that, under sintering conditions of 230℃and 0.5 MPa, Sn element spreads along Al grain boundary preferentially, and then spreads along Al substrate. With the increase of the diffusion time, there exist strong elemental diffusion and dissolution between Sn and Al. Finally, there are no new phases formed at the interface. The interface transition layer, which is in the sawteeth shape, consists of Al and Sn divorced alloy. The formation of metallurgical bonding interface comes from the solid phase diffusion, dissolution and crystallization between Al and Sn.
参考文献
| [1] | 王双喜,刘雪敬,耿林,耿彪.Al-Sn预合金粉末及其在金刚石磨具中的应用[J].中国有色金属学报,2008(03):471-475. |
| [2] | 袁鸽成,张新明,娄燕雄,黎祚坚.Tribological characteristics of new series of Al-Sn-Si alloys[J].中国有色金属学会会刊(英文版),2003(04):774-780. |
| [3] | 朱敏,曾美琴,欧阳柳章,吴志方,刘辛.机械合金化制备的Al基轴承合金的结构与性能[J].华南理工大学学报（自然科学版）,2007(10):37-43. |
| [4] | 周生刚,张瑾,竺培显,孙勇,黄子良.Pb-Sn-Al复合电极的制备及其性能初步研究[J].云南大学学报（自然科学版）,2009(06):600-603. |
| [5] | 竺培显,周生刚,孙勇,黄文芳,杨秀琴,许健,张瑾.液固包覆法制备Al-Pb层状复合材料及其界面研究[J].材料热处理学报,2009(04):1-5. |
| [6] | MA H Y;ZHU P X;ZHOU S G;XU J HU W F YANG H M GUO J X CHEN M J .Preliminary research on Pb-Sn-Al laminated composite electrode materials applied to zinc electrodeposition[J].Advanced Materials Research,2011,150/151:303-308. |
| [7] | Klein E;Schwarz B;Eisenmenger-Sittner C;Tomastik C;Barna PB;Kovacs A .The initial states of wetting and spreading of Sn on Al surfaces[J].Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology,2005(1/3):74-80. |
| [8] | Eisenmenger-Sittner C.;Bangert H.;Bergauer A.;Brenner J.;Stori H. Barna PB. .Solid-state wetting and spreading of tin (Sn) on aluminium interfaces[J].Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology,2003(1/2):253-259. |
| [9] | LIU X;ZENG M Q;MA Y;ZHU M .Wear behavior of Al-Sn dispersoids manipulated by mechanical alloying and sintering[J].WEAR,2008,265:1857-1863. |
| [10] | 赵如龙,孙勇,段永华,鲁俐,殷国祥.机械振动法制备Al/Sn复合材料[J].材料热处理学报,2009(04):10-13. |
| [11] | Jeurgens LPH.;Sloof WG.;Tichelaar FD.;Mittemeijer EJ. .Structure and morphology of aluminium-oxide films formed by thermal oxidation of aluminium[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2002(2):89-101. |
| [12] | Schaffer GB.;Sercombe TB.;Lumley RN. .Liquid phase sintering of aluminium alloys[J].Materials Chemistry and Physics,2001(1/3):85-91. |
| [13] | ERDéLYI G;FREITAG K;RUMMEL G;MEHRER H .Volume and grain boundary diffusion of implanted 113Sn in aluminium[J].Applied Physics A:Solids and Surfaces,1991,53(04):297-302. |
| [14] | Liu, X;Zeng, MQ;Ma, Y;Zhu, M .Melting behavior and the correlation of Sn distribution on hardness in a nanostructured Al-Sn alloy[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2009(1/2):1-7. |
| [15] | 宋玉强,李世春,杜光辉.Ti/Cu固相相界面扩散溶解层形成机制的研究[J].稀有金属材料与工程,2009(07):1188-1192. |
| [16] | George Kaptay;Gabor Csicsovszki;Maziar S. Yaghmaee .An Absolute Scale for the Cohesion Energy of Pure Metals[J].Materials Science Forum,2003(0):235-240. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%