钛合金是一种重要的结构材料,晶粒尺寸对其超塑性能有着显著的影响,细晶或超细晶是钛合金在低温或高应变速率条件下获得优异超塑性性能的重要组织条件.概述了国内外钛合金细晶超塑性技术的研究进展,介绍了目前常用的制备细晶钛合金的方法(如大塑性变形法及氢处理技术)及其超塑性性能,展望了钛合金细晶超塑性技术未来的发展趋势.通过晶粒的细化,钛合金超塑性能及成形效率得到了极大提高,有利于实际生产中降低工具损耗和生产成本,为钛合金超塑成形技术的进一步推广和应用奠定了基础.
参考文献
| [1] | 何景素.金属的超塑性[M].北京:科学出版社,1993 |
| [2] | 陈浦泉.组织超塑性[M].哈尔滨:哈尔滨工业大学出版社,1988:3. |
| [3] | 吴诗淳.金属超塑性变形理论[M].北京:国防工业出版社,1997 |
| [4] | 林兆荣.金属超塑性成形原理及应用[M].北京:航空工业出版社,1990:11. |
| [5] | 郭鸿镇.合金钢与有色合金锻造[M].西安:西北工业大学出版社,1999:6. |
| [6] | Ο·Π·索朗宁娜;张志方;葛志明.热强钛合金[M].北京:第三机械工业部第621研究所出版社,1981 |
| [7] | 曾立英,赵永庆,李倩.钛合金低温超塑性的研究进展[J].热加工工艺,2006(22):61-65. |
| [8] | Salishcev G A;Galeyev R M et al.Development of Ti-6Al-4V sheet with low temperature superplastic properties[J].Journal of Materials Processing Technology,2001,116:265. |
| [9] | Sun J.;He YH.;Wu JS. .Characterization of low-temperature superplasticity in a thermomechanically processed TiAl based alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(0):885-890. |
| [10] | Sergueeva AV.;Stolyarov VV.;Valiev RZ.;Mukherjee AK. .Superplastic behaviour of ultrafine-grained Ti-6A1-4V alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):318-325. |
| [11] | Vinogradov A Yu;Stolyarov V V et al.Cyclic behavior of ultrafine-grain titanium produced by severe plastic deformation[J].Materials Science and Engineering,2001,A318:163. |
| [12] | Valiev R Z;Islamgaliev R K;Semenova I P .Superplasticity in nanostructured materials:New challenges[J].Materials Science and Engineering,2007,A463:2. |
| [13] | Sergueeva A.V.;Stolyarov V.V. .ENHANCED SUPERPLASTICITY IN A Ti-6Al-4V ALLOY PROCESSED BY SEVERE PLASTIC DEFORMATION[J].Scripta materialia,2000(9):819-824. |
| [14] | 顾加琳;孙新军;白秉哲.旋锻制备超细晶钛合金及其超塑性[J].金属学报,2002(增刊):378. |
| [15] | 曾立英,赵永庆,李丹柯,李倩.低温超塑性钛合金的超塑性研究[J].航空材料学报,2006(05):6-9. |
| [16] | Stolyarov VV;Lowe TC;Islamgaliev RK;Valiev RZ;Zhu YT .Two step SPD processing of ultrafine-grained titanium[J].Nanostructured Materials,1999(7):947-954. |
| [17] | Stolyarov VV.;Zhu YT.;Alexandrov IV.;Lowe TC.;Valiev RZ. .Grain refinement and properties of pure Ti processed by warm ECAP and cold rolling[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):43-50. |
| [18] | Zhu X J;Tan M J;Zhou W .Enhanced superplasticity in commercially pure titanium alloy[J].Scripta Materialia,2005,52:651. |
| [19] | Patankar S N;Escobedo J P;Field D P et al.Superior superplastic behavior in fine-grained Ti-6Al-4V sheet[J].Journal of Alloys and Compounds,2002,345:221. |
| [20] | 苏祖武;孟国文;郭鸿镇 .TC11钛合金棒材显微组织等轴细晶细晶化工艺研究[J].金属学报,1991,27(05):299. |
| [21] | 刘咏,王海兵,黄伯云,周科朝,汤慧萍.机械合金化方法制备细晶钛合金[J].中南工业大学学报(自然科学版),2002(03):258-260. |
| [22] | Zhang H.;Xu JL.;Wang SH.;Lam TF. .THE EFFECT OF HYDROGEN ON THE STRENGTH AND SUPERPLASTIC DEFORMATION OF BETA-TITANIUM ALLOYS[J].Journal of Materials Science,1996(22):6105-6111. |
| [23] | 侯红亮,李志强,王亚军,关桥.钛合金热氢处理技术及其应用前景[J].中国有色金属学报,2003(03):533-549. |
| [24] | 张少卿.氢在钛合金热加工中的作用[J].材料工程,1992(02):24. |
| [25] | 杜忠权,王高潮,陈玉秀.渗氢处理细化Ti-10V-2Fe-3Al合金组织及改善其超塑性性能的效果[J].航空学报,1994(07):882. |
| [26] | Zhang Shaoqing;Zhao Linruo .Effect of hydrogen on the superplasticity and microstructure of Ti-6Al-4V alloy[J].Journal of Alloys and Compounds,1995,218:233. |
| [27] | 杨扬.氕处理法制备细晶粒、超细晶粒钛合金及其机械性能研究[J].稀有金属与硬质合金,2005(01):57-60. |
| [28] | 李淼泉,张伟福,朱堂葵,侯宏亮,李志强.氢对Ti-6Al-4V合金微观组织的影响[J].稀有金属材料与工程,2010(01):1-5. |
| [29] | Liu Yong;Li Miaoquan .Application of thermohydrogen processing for formation of ultra-fine equiaxed grains in near α Ti600 alloy[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2009,40(12):3009. |
| [30] | LI Miaoquan,LIN Yingying.Effect of hydrogenation on the microstructure of Ti-5.6Al-4.8Sn-2.0Zr alloy[J].稀有金属（英文版）,2009(04):343-345. |
| [31] | Zhu Tangkui;Li Miaoquan .Effect of 0.770 wt%H addition on the microstructure of Ti-6Al-4V alloy and mechanism of δ hydride formation[J].Journal of Alloys and Compounds,2009,481(1-2):480. |
| [32] | Li Miaoquan;Lin Yingying .Grain refinement in near alpha Ti60 titanium alloy by the thermohydrogenation treatment[J].International Journal of Hydrogen Energy,32(05):626. |
| [33] | 林莺莺,潘洪泗,李淼泉.钛合金的氢处理技术及其对超塑性的影响[J].材料工程,2005(05):60-64. |
| [34] | Hirofumi Yoshimura;Jun Nakahigashi .Tensile and impact properties of mesoscopic-grained #alpha|#+#beta#-type titanium alloys obtained through hydrogen treatments[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,1999(0):858-861. |
| [35] | Yoshimura H;Nakahigashi J .Ultrafine-grain refinement and superplasticity of titanium alloys obtained through protium treatment[J].International Journal of Hydrogen Energy,2002,27(78):769. |
| [36] | M. A. Murzinova;G. A. Salishchev;D. D. Afonichev .Formation of nanocrystalline structure in two-phase titanium alloy by combination of thermohydrogen processing with hot working[J].International journal of hydrogen energy,2002(7/8):775-782. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%