采用自行研制的微成形系统进行热压缩实验,分别研究成形温度、成形时间和冲头速度等对尺寸为d1 mm×1.5 mm的Zr41.2Ti13.8Cu12.5Ni10Be22.5块体非晶合金(Vit.1)在过冷液相区微塑性成形性能的影响规律.进一步研究了不同坯料尺寸对Vit.1块体非晶合金在过冷液相区超塑性成形性能的影响程度,结果表明流动应力随坯料尺寸的减小而降低.在此基础上,利用闭式模锻方法成形了分度圆直径为d1 mm的微型齿轮,采用SEM观察成形件的表面形貌,结果表明采用微成形方法可以获得尺寸精度较高的Vit.1块体非晶合金微型齿轮.
参考文献
| [1] | 谢建新,周成,张志豪.非晶合金精细零部件的超塑性成形技术[J].材料导报,2003(02):8-11. |
| [2] | 黄劲松,刘咏,陈仕奇,刘祖铭,黄伯云.锆基非晶合金的研究进展与应用[J].中国有色金属学报,2003(06):1321-1332. |
| [3] | Yasunori Saotome;Seiji Miwa;Tao Zhang .The micro-formability of Zr-based amorphous alloys in the supercooled liquid state and their application to micro-dies[J].Journal of Materials Processing Technology,2001(1/3):64-69. |
| [4] | Yasunori Saotome;Kenichi Imai;Shigeo Shioda .The micro-nanoformability of Pt-based metallic glass and the nanoforming of three-dimensional structures[J].Intermetallics,2002(11/12):1241-1247. |
| [5] | Saotome Y;Itoh K;Zhang T et al.Superplastic nanoforming of Pd-based amorphous alloy[J].Scripta Materialia,2001,44:1541-1545. |
| [6] | Yasunori Saotome;Hiroyuki Iwazaki .Superplastic backward microextrusion of microparts for micro-electro-mechanical systems[J].Journal of Materials Processing Technology,2001(1/3):307-311. |
| [7] | T.G.Nieh;T.Mukai;C.T.Liu;J.Wadsworth .SUPERPLASTIC BEHAVIOR OF A Zr-10Al-5Ti-17.9Cu-14.6NiMETALLIC GLASS IN THE SUPERCOOLED LIQUID REGION[J].Scripta materialia,1999(9):1021-1027. |
| [8] | 张志豪,刘新华,周成,谢建新.Zr基大块非晶合金的超塑性成形性能[J].中国有色金属学报,2004(07):1073-1077. |
| [9] | 张志豪,周成,谢建新.Zr55Al10Ni5Cu30大块非晶合金的超塑性挤压成形性能[J].中国有色金属学报,2005(01):33-37. |
| [10] | 张志豪,谢建新.小冲杆试验法评价大块非晶合金的超塑性性能[J].中国有色金属学报,2005(11):1874-1880. |
| [11] | 章吉良;杨春生.微机电系统及其相关技术[M].上海:上海交通大学出版社,2001:1-2. |
| [12] | 王春举 .微型器件精密微塑性成形技术研究[D].哈尔滨工业大学,2003. |
| [13] | 周健 .5A02铝合金微型齿轮精密微塑性成形工艺研究[D].哈尔滨工业大学,2004. |
| [14] | 邢大伟 .ZrCuNiAlTi块体非晶合金的形成与晶化动力学[D].哈尔滨工业大学,2003. |
| [15] | Cohen M H;Turnbull D .Molecular transport in liquidsandglass[J].Journal of Chemical Physics,1959,31:1164-1169. |
| [16] | Wang W H;Bai H Y;Luo J L et al.Supersoftening of transverse phonons in Zr41Ti14 Cu12.5Ni10Be22.5 bulk metallic glass[J].Physical Review B,2000,62(01):25-28. |
| [17] | Spaepen F .A microscopic mechanism for steady state inhomogeneous flow in metallic glasses[J].Acta Materialia,1977,25:407-415. |
| [18] | van den Beukel A .On the kinetics of structrual relaxation in metallic glasses[J].Key Engineering Materials,1993,81-83:3-16. |
| [19] | 古勃金.金属塑性变形[M].北京:中国轻工业出版社,1960:171-177. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%