利用铝粉在高压氮气中的自蔓延燃烧合成(SHS)方法,制备了氮含量较高(33.5wt%)的AIN,研究了稀释剂含量、添加剂含量、氮气压力、反应物的相对密度、反应物厚度对燃烧产物氮含量的影响,并对后燃烧现象进行了分析,产物中发现氮化铝晶须和棒晶.
Aluminium nitride(AIN) containing higher nitrogen(33.5wt%) was prepared by self-propagatinghigh-temperature (combustion) synthesis (SHS) of aluminium powder in pressurized nitrogen atmosphere, and the effects of diluent content, additive content, nitrogen pressure, relative density ofreactants, thickness of reactants on nitrogen content of AIN were studied. After-burn phenomena,AIN whiskers and AIN stick crystal were also observed.
参考文献
[1] | 江国建, 庄汉锐,李文兰(JIAN Guo-Jian et al.). 无机材料学报(Journal of Inorganic Materials), 1998, 13 (1): 105--108 2 Crider J F. Ceam. Eng. Sci. Proc., 1982, 3 (9-10): 519--528 3 Munir Z A, Umberto Ancelmi Mi-tamburini. Materials Science Reports, 1989, 3: 277--365 4 Munir Z A. J. Ceram. Soc. Bull., 1988, 67 (2): 342--349 5 江国建, 庄汉锐,李文兰,邬凤英,张宝林,高压下自蔓延燃烧合成氮化铝反应机理研究(二),硅酸盐学报,已投稿 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%